Andrew James Double Induction Cooker Руководство пользователя - Страница 6
Просмотреть онлайн или скачать pdf Руководство пользователя для Кухонная техника Andrew James Double Induction Cooker. Andrew James Double Induction Cooker 12 страниц.
Печатать страницу
cookware heats up the hotplate.
Do not heat up any unopened tins on the induction hotplate. A heated tin
could explode, therefore remove the lid beforehand.
Scientific tests have proven that induction hotplates do not pose a risk.
However, persons with a pacemaker should keep a minimum distance of 60
cm to the device while it is in operation.
Operating the device
Plug the lead into a suitable power outlet and an acoustic signal will sound
Place induction compatible cookware in the centre of the hotplate. Please
note you can test the suitability of the cookware by placing a magnet (such
as a fridge magnet) onto the bottom of the cookware. If the magnet attaches
to the bottom of the cookware, the cookware is suitable to use with the
induction hob.
Press the On/Standby key once, the LED display will show "L" and the power
indicator light will flash. The cooking function is now ready to be selected.
(Note: if no operation is selected for 30 seconds after pressing the On/
Standby key, the indicator light will automatically turn off).
Press the function key once, the pre-set power stage "5" is selected and the
device will begin to heat.
You can change the power setting with the arrow keys at any time from the
power range of 1-10.
Press the function key a second time to select the temperature setting. The
pre-set temperature "120˚C" will automatically be selected.
The temperature setting can then be changed from a range of 60-240˚C by
using the arrow keys.
The induction hob can be changed from the power level setting mode to the
temperature setting mode at any time during the operation by pressing the
function key and selecting the desired function. The value last set in the
respective operating mode will be stored upon switch over.
Press the function key a third time and the time function will be selected.
6