Electrolux EFC 6405 Инструкция по обслуживанию - Страница 7

Просмотреть онлайн или скачать pdf Инструкция по обслуживанию для Вентиляционная вытяжка Electrolux EFC 6405. Electrolux EFC 6405 19 страниц. Aes ii absorption refrigerators
Также для Electrolux EFC 6405: Руководство пользователя (13 страниц), Руководство пользователя (12 страниц), Руководство пользователя (16 страниц), Руководство по эксплуатации (19 страниц), Руководство пользователя (12 страниц)

3.3 Display Module

The display module is located on the control frontplate of the AES II refrigerator.

Power switch

AES operation indicator

Low voltage LED

Sensor for temperature setting

LEDs for displaying the selected temperature setting

You must operate the power switch (A) to turn the device on.

The AES function LED (B) then lights up green, and the middle LED (E) lights up yellow to display

the selected temperature setting.

You can use the momentary-contact pushbutton for temperature selection (D) to change the refri-

gerator section temperature setting. The low voltage LED (C) lights up yellow if the refrigerator

has selected gas operation to maintain the refrigerating capacity due to low voltage in an electri-

cal supply source (230 V or 12 V).

If there is a fault during gas operation (gas couldn't be lit, gas container empty, etc.), the AES

LED (B) flashes red. In this case, the device does not continue to cool. You must eliminate the

gas fault and start the refrigerator again. (Use the power switch to switch the refrigerator off and

on again.)

Important:: If there is a fault during gas operation and you don't notice it before the refrigerator

changes to 230 V, for example, due to a priority change, the AES LED (B) again changes to

green until the cooling function has been established again. However, the next time it wants to

change to gas operation, the fault is displayed again, and gas operation is not started. The rea-

son is that there are legal regulations that do not permit the device to carry out an automatic

reset. If you have a gas fault displayed by a red flashing AES LED (B), you absolutely must

acknowledge this gas fault by using the power switch to switch the device off and on again.

GREEN:

flashing RED

YELLOW

Refrigerator working

Fault in the gas operation,

refrigerator not cooling.

Rrefrigerator in gas opertion,

because the electrical power supply

voltage is insufficient.