AirTech ATS-100 Руководство пользователя - Страница 2

Просмотреть онлайн или скачать pdf Руководство пользователя для Радио AirTech ATS-100. AirTech ATS-100 8 страниц. Land mobile radio

Печатать страницу

APPROVAL

1. FCC Approval

FCC ID: ONKATS-100

1) Safety Training Information

Your

Handheld

Transceiver

electromagnetic energy during transmit mode. This radio is

designed for and classified as "Controlled Exposure /

Occupation Environment", meaning it must be used only

during the course of employment by individuals aware of the

hazards, and the ways to minimize such hazards. This radio

is NOT intended for use by the "General Population /

Uncontrolled Environment.

This radio complies with FCC RF radiation exposure limits

set forth for a controlled environment. This radio should be

installed and operated with a minimum distance of 2.5

centimeters between the radio and your body. Therefore, to

ensure that your exposure to RF electromagnetic energy is

within the FCC allowable limits for occupational use, always

follow below information.

Do not operate the radio without a proper antenna as this

may damage the radio and may also cause you to exceed

FCC RF exposure limits. A proper antenna is the antenna

supplied with this radio by the manufacturer or an antenna

specifically authorized by the manufacturer for use with this

radio.

Do not transmit for more than 50% of total radio use time

("50% duty cycle"). Transmitting more than 50% of the time

can cause FCC RF exposure compliance requirements to be

exceeded.

generates

Always use Airtech supplied accessories (antennas, batteries,

belt clips, speaker/mics, etc.).

accessories can cause the FCC RF exposure compliance

requirements to be exceeded.

Always keep the antenna at least 2.5 cm (1 inch) away from

the body when transmitting and only use the belt-clips, when

attaching the radio to your belt, etc., to ensure FCC RF

exposure compliance requirements are not exceeded.

2) LABEL

This radio complies with the FCC

RF exposure limits for Occupational

Use Only.

3) This device complies with the FCC Rules. Operation is subject

to the following two conditions: (1) this device may not cause

harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation.

CAUTION: Changes or modifications not expressly approved by

the party responsible for compliance could void the user's authority

to operate the equipment.

Use of unauthorized