Atlantic MD1500 Руководство по эксплуатации - Страница 2
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Водяной насос Atlantic MD1500. Atlantic MD1500 17 страниц. Md-series
Также для Atlantic MD1500: Руководство по эксплуатации (6 страниц)
Печатать страницу
Introduction
Thank you for selecting the TidalWave MD-Series pump. Before using this pump please
take a moment to review this manual.
To avoid an accident do not use the pump in any way other than as described in this
manual. Please note the manufacturer cannot be responsible for accidents arising because
the product was not used as prescribed. After reading this manual keep it as a reference in
case questions arise during use.
Flow Chart (GPH):
MODEL
MAX FLOW
MD250
300
MD350
370
MD550
650
MD750
790
MD1000
1080
MD1250
1330
MD1500
1560
MD1000, MD1250 and MD1500 pumps include an 1½" adaptor for use with the Triton Check Valve and
Atlantic Plumbing Kits. This adaptor makes the discharge height of the Mag Drive Series pumps equal to the
TW2400 pump. If using a Mag Drive Series pump with the Triton Check Valve, Colorfalls Kit or Fountain Basin
Plumbing kits, please reference the plumbing instructions for a TW2400 as outlined in the installation manuals
for these items.
Prior to Operation and Installation
When the pump is delivered, first perform the following checks:
• Check for any damage to pump and power cable that may have occurred during
the shipment.
• Check the model number to make sure it is the product that was ordered and verify the
voltage and frequency are correct.
Caution
• DO NOT operate this product under any condition other than those for which it is specified.
Failure to observe this precaution can lead to electrical shock, electrical leakage, fire, water
leakage or other problems.
• The pump is a 110/120 volt 60 Hz pump, please only use with a power supply voltage within
110-120 volt 60 Hz.
• Never place your hand or any object in or near the inlet opening while this equipment is
operating. If pump inlet is clogged, always turn off the power supply and wait until the
motor is completely stopped before attempting to remove any clogged material.
• Please make sure that the power plug and the AC outlet receptacle are protected and away
from water or pump discharge hose to prevent accidental electric shock or short circuit.
• Always operate the pump completely submerged in water.
• Avoid dry operation, which will not only lower performance but can cause the pump to
overheat/malfunction, leading to electrical leakage, shock or premature failure.
• Always turn off power or unplug the pump prior to performing any maintenance or placing
your hands into the water.
• CAUTION:
THIS PUMP IS TO BE USED IN A CIRCUIT PROTECTED BY A GROUND CIRCUIT INTERRUPTER.
2
5'
10'
65
65
145
385
465
785
275
1040
580
1255
780
15'
20'
25'