Atlantic Boilers ME STANDARD 315 Руководство по эксплуатации и техническому обслуживанию - Страница 15
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Котел Atlantic Boilers ME STANDARD 315. Atlantic Boilers ME STANDARD 315 20 страниц. Electric boiler
Печатать страницу
3.7
Operation of the digital controller
Factory settings (primary heating circuit)
Flow temperature – 80degC
Maximum flow temperature setting – 95degC
Minimum flow temperature setting - 20degC
Time delay T1 – 30 seconds
Time delay T2 - 1 minute
Time delay T3 - 2 minutes
digital controller has numbers or message, touch settings
+ – touch raise settings, – touch lower settings
1.
The Panel has a registration label
2.
The wiring is capable of a maximum current of 23kA
3.
Neutral panel wiring is not required
4.
The Panel is protected by isolators, circuit breakers and fuses.
5.
Earth wiring is essential
6.
One week after commissioning, all connectors – on immersion
heaters and incoming electrical supplies – need to be checked.
This should be repeated annually.
7.
Manufacturing tests include heat output and control circuitry
8.
The boilers should not be installed or operated in corrosive,
explosive or humid atmosphere
9.
Adequate natural ventilation is required. 550mm2 x kW free
area at high and low level is recommended
3.8
Alarm Signals
On Alarm, light (7) shows and the following messages appear on (1)
< PFO > Lock-out or power cut
< HA > High temperature lock-out
< LA > Low temperature alarm
ME Standard Manual
MULTI ELEC STANDARD
2000
ATLANTIC BOILERS
TEL: 0161 621 5960
POWER ON
75
8 0
1 2
5
PGM
RUN
STOP
K3
K2
K1
KW
EXIT
LOCK OUT
15