Electrolux ERC925DSD Руководство пользователя - Страница 9
Просмотреть онлайн или скачать pdf Руководство пользователя для Вентиляционная вытяжка Electrolux ERC925DSD. Electrolux ERC925DSD 44 страницы. Canopy rangehood
Печатать страницу
TROUBLE SHOOTING
If there is a fault, first try to find a solution to the problem
yourself. If you cannot find a solution to the problem
yourself, contact an authorized service center.
problem
Appliance not stable
Appliance is not in horizontal position
Performance in terms of oil capture
are not satisfying
Appliance does not work
The light does not work
Noise of hood is higher than customer
expectation.
Before contacting the Authorised Service Centre:
Switch the appliance on again to see if the problem has
disappeared. If not, switch it off again and repeat the
operation after an hour.
If your appliance still does not work properly after carrying
out the checks listed in the troubleshooting guide and
switching the appliance on again, contact the Authorised
Service Centre, clearly explaining the problem
and specifying:
•
the type of fault;
•
the model;
•
the type and serial number of the appliance (given on
the rating plate).
possible cause
The appliance is not correctly installed
The appliance is not correctly installed
Oil and grease on metal filters or
charcoal filters.
The appliance is not correctly connected
The LED is broken
Air outlet diameter in the wall is too small,
causing a pressure drop and an increase
in motor speed.
Product is installed in recirculation mode.
More than one bend in the
ventilation duct.
solution
Follow the Installation instruction
enclosed to the appliance.
Follow the Installation instruction
enclosed to the appliance.
Follow the cleaning frequency of
filters as described in the user
manual
Verify that the main cable is
connected to the motor group or
the plug is connected to the socket
For replacement, contact the
Authorised Service Centre.
Follow the Installation instruction
enclosed to the appliance.
Product in recirculation mode (and
using a charcoal filter) will generate
an higher noise than a product in
extration mode.
If the exhaust system in the building
has multiple bend in or a long
distance, this can increase the
noise of the product.
9