Electrolux ICON RH30WC60GS Брошюра и технические характеристики - Страница 2

Просмотреть онлайн или скачать pdf Брошюра и технические характеристики для Вентиляционная вытяжка Electrolux ICON RH30WC60GS. Electrolux ICON RH30WC60GS 2 страницы. 30” et 36” hotte aspirante
Также для Electrolux ICON RH30WC60GS: Заводской каталог деталей (4 страниц), Руководство по установке, использованию и уходу (21 страниц), Руководство по установке, использованию и уходу (22 страниц), Руководство по установке, использованию и уходу (22 страниц), Руководство по эксплуатации и уходу (44 страниц), (Английский) Руководство по установке, использованию и уходу (22 страниц), (Французский) Руководство по установке, использованию и обслуживанию (22 страниц)

Печатать страницу
Electrolux ICON RH30WC60GS Брошюра и технические характеристики
Glass & Stainless Canopy Hood
RH30WC60GS
30" Glass and Stainless
Canopy Wall-Mount Hood Specifications
Product Weight – 60 Lbs.
•
Wall-Mount Installation
•
Ventilation is convertible to be either ducted outside, or recirculated
•
inside requiring no ducting.
Sones Rating – 9.0
•
Voltage Rating – 120V / 60 Hz / 15 Amps
•
Connected Load (kW Rating) @ 120 Volts = 0.474 kW (For use on
•
adequately wired 120V, dedicated circuit having 2-wire service with a
separate ground wire. Appliance must be grounded for safe operation.)
Amps @ 120 Volts = 3.8 Amps
•
Always consult local and /or national electric codes. Check local
•
building codes for installation requirements, as they may vary per locale.
Minimum installation height allowed from bottom of hood to cooking
•
surface is 24" - 30" for electric and 30" for gas. (NOT more than 36"
recommended.)
To prepare mounting surface, adequate structure and support must be
•
provided, capable of supporting 100 lbs.
CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • electroluxappliances.ca
RH30WC60GS 12/10
Ducted Option Specifications
For outside ventilation only.
•
Exhaust Duct Required – 8" round
•
For most efficient airflow exhaust, use a straight run or as few elbows
•
as possible.
Use metallic flex ducting only to connect rigid duct directly to transitions
•
(if allowed by code).
Thermal breaks such as short section of nonmetallic duct, should
•
be used in areas of extreme cold.
Cold weather installations should have additional backdraft damper
•
installed.
Refer to web for detailed duct preparation installation instructions.
•
Ductless (Recirculated) Option Specifications
If ducting to outside is not an option, vent hood can be converted to
•
ductless with use of optional Duct-Free Kit (EIDFW60GS).
Refer to web for detailed convertible ventilation installation instructions.
•
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxappliances.ca or supplied with product
for detailed instructions.
Optional Accessories
Charcoal Filter – (EICFW60GS).
•
Duct-Free Kit – (EIDFW60GS).
•
© 2008 Electrolux Major Appliances, NA
Printed in Canada