Electrolux ICON RH36WCT6GS Руководство по эксплуатации и уходу Инструкции по установке - Страница 15
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и уходу Инструкции по установке для Вентиляционная вытяжка Electrolux ICON RH36WCT6GS. Electrolux ICON RH36WCT6GS 20 страниц. 36" glass canopy wall-mount hood
Также для Electrolux ICON RH36WCT6GS: Заводской каталог деталей (4 страниц), Технические характеристики продукта (2 страниц)
Печатать страницу
Proper maintenance of the Range Hood will assure proper performance of the unit.
Grease filters
The grease filters should be cleaned when the filter
reset switch will be illuminated.
Use a warm detergent solution. Grease filters are
dishwasher safe.
See "INSTALL FILTERS" section for removal and
installation instructions.
Once the grease filters are cleaned and installed, press
in and hold the "filter reset switch" for approximately 3
seconds.
Non-Ducted Recirculation
filters
The non-ducted recirculation filter should be changed
when the filter reset switch will be illuminated and blink.
See "INSTALL FILTERS" section for removal and
installation instructions.
Once the new charcoal filter is installed, press in and
hold the "filter reset switch" for approximately 3
seconds.
Maintenance
Hood cleaning
Stainless steel is one of the easiest materials to keep
clean. Occasional care will help preserve its fine
appearance.
Cleaning tips:
Hot water with soap or detergent is all that is usu-
ally needed.
Follow all cleaning by rinsing with clear water. Wipe
dry with a clean, soft cloth to avoid water marks.
For discolorations or deposits that persist, use a
non-scratching household cleanser or stainless steel
polishing powder with a little water and a soft cloth.
For stubborn cases, use a plastic scouring pad or
soft bristle brush together with cleanser and water.
Rub lightly in direction of polishing lines or "grain"
of the stainless finish. Avoid using too much
pressure which may mar the surface.
DO NOT allow deposits to remain for long periods
of time.
DO NOT use ordinary steel wool or steel brushes.
Small bits of steel may adhere to the surface causing
rust.
DO NOT allow salt solutions, disinfectants,
bleaches, or cleaning compounds to remain in
contact with stainless steel for extended periods.
Many of these compounds contain chemicals which
may be harmful. Rinse with water after exposure
and wipe dry with a clean cloth.
Painted surfaces should be cleaned with warm water
and mild detergent only.
15