Atlantic Technology 6200e Руководство по эксплуатации - Страница 4
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Система домашнего кинотеатра Atlantic Technology 6200e. Atlantic Technology 6200e 12 страниц. High performance loudspeaker components
Также для Atlantic Technology 6200e: Брошюра и технические характеристики (2 страниц)
4
Placement
Acoustic Controls
System 8200e and 6200e LR speakers include unique acoustic controls
to help maximize their performance in your room. These controls are
explained in greater detail on page 9.
Model 8200e C and 6200e C Center Channel
Speakers
It is vital to the accurate reproduction of a multi-channel soundtrack that
the three front speakers have the same sonic signature. Therefore, the 8200e
C and 6200e C Channel Speakers have the same voicing as the LR speakers
(see Figure 2). It is designed for use only with a dedicated subwoofer and
includes the same unique acoustic controls mentioned above.
The 8200e and 6200e C are designed to be placed horizontally.
Models 8200e SR and 4200e SR Surround Speakers
The Model 8200e SR and 4200e SR Dipole/Bipole Surround Speakers (Fig-
ure 3) are intended for use in multi-channel audio/video sound systems
only as dedicated side or back surround channel speakers. The 8200e SR uti-
lizes dual 5¼-inch GLH drivers and two of the same tweeters as described
above. The 4200e SR utilizes dual 4½-inch GLH drivers and two of the
same tweeters as described above. The surround speakers can be switched
between Dipole and Bipole operation. These settings are explained on page
10, "Dipole/Bipole Operation of the SR Speakers. "
NOTe: Although the speakers in the Atlantic Technology Systems
8200e are acoustically and cosmetically matched to each other for
ideal results, they may also be used with other Atlantic Technology
components with extremely satisfying results.
Placement
Speaker/room interactions have a huge impact on the sound of the system.
Moving the speakers just a little can make a dramatic difference in what you
hear. Remember that the best acoustic placement of the speakers will vary
from room to room. Use the following placement guidelines (see page 5) as
a starting point. But also feel free to experiment. In fact, it may be beneficial
to hook up the front LR and surround speakers with some extra wire and
to simply drape the wire across the floor before installing the speakers per-
manently. This will allow you the opportunity to move the speakers around
easily so you can find the best sonic and visual locations.
Home Theater
Remember that the primary goal of a good home theater is not to make you
believe that you are in a movie theater. It's to make you believe you're in the
movie. For a home theater system, place the LR speakers on either side of
the television. The left and right front speakers should be far enough apart
(6 to 10 feet is usually best) that you get a good stereo "image" when they are
playing alone, but not so far apart that the sound seems to be disembodied
from the TV, distracting you from the picture. When using a center channel
speaker, a wider separation of the left and right front speakers is usually pos-
sible. You may chose to "toe" the LR speakers in, aiming them approximately
at the prime listening position. This can be particularly useful if the front LR
speakers are fairly far apart.
IMPORTANT NOTe Try to keep the LR and C tweeters approximately
centered at or aimed at ear level when seated. This is because the align-
ment of the drivers on the front panel results in limited vertical spread of
the mid and high frequency sounds to reduce unwanted floor and ceiling
reflections. If the speakers are too high or too low however, you will miss
a significant portion of the upper middle and high range elements of the
sound. This alignment of the drivers provides enhanced horizontal spread
of the sound making for a much better sound experience for a group of
listeners and reducing the need to sit in a precise "sweet spot."
The center channel speaker should be placed directly above or below your
television. It is important that the speaker is centered on the screen, not off to
the side. The pivoting design of the 8200e and 6200e C allows you to tilt it up
or down so that the speaker points most directly at the listening position.
Surround effects and Speaker Locations
The 8200e SR and 4200e SR' s shape allows great flexibility in placement. Due
to their switchable Dipole/Bipole design, it's possible to place the speakers
almost anywhere within the rear third of the room and get good results.
However, the best location for surround speakers is straight out to the sides
of, or slightly behind the primary listening area, approximately 1-2 feet above
seated ear level to no less than 2 feet down from the ceiling.
As noted above, the surround speakers (as opposed to the back speaker(s)
in a 5.1, 6.1 or 7.1 channel system, see below) are primarily intended to
re-create the ambient sounds taking place in the movie scene. Therefore,
throughout most of a movie or TV program you may not be consciously
aware of output from these speakers. In other words, don't worry if you aren't
hearing the surround speakers. Please try to avoid the trap of turning the
surrounds up and up so that you hear them most of the time. The result will
be a much less believable surround experience.
There are dedicated LEFT and RIGHT model SR speakers. This is clearly
marked on the back of each speaker. Be sure that the Left side surround
speaker is placed directly to the left side of the prime listening area (facing
the screen) and the Right speaker is directly to the right side. As an easy
reference, the Dipole/Bipole switch should always be facing the back of the
room. Should you wish to hang them on the wall, closer than 24 inches to
the ceiling, you should remove and re-install the keyhole hangers upside
down. Then turn the speakers over, hanging them upside down, and swap
them side to side for proper operation.
System 8200e/6200e High Performance Loudspeakers