Electrolux PLHV42P8CC Руководство пользователя - Страница 10
Просмотреть онлайн или скачать pdf Руководство пользователя для Вентиляционная вытяжка Electrolux PLHV42P8CC. Electrolux PLHV42P8CC 32 страницы. Range hood
Также для Electrolux PLHV42P8CC: Руководство пользователя (32 страниц), Руководство пользователя (11 страниц), Руководство пользователя (32 страниц), Руководство пользователя (10 страниц)
Печатать страницу
Hood Cleaning
Figure 15
Be sure lights are cool before cleaning the hood.
To Clean Filters
•
The metal grease filters will last forever.
They are made of anodized aluminum
•
It is recommended that the filters be washed at least once a month; they can
be washed by hand or in the dishwasher.
•
Drain waterthrough edge holes and let each filterdrythoroughly
before replacing
it.
To Remove The Metal Grease Filters
•
Disconnect the hood from electricity.
•
Push clips towards the rear and pull the filters downward.
•
Disengage each filter from a side and remove it
To Replace
The Metal
Grease Filters
•
Reverse procedure.
To
Clean Hood Surface
For general care, wipe the outside of the stainless steel, white, black or glass
hood with sudsy water or household cleaners such as Fantastic® or Formula
409 ®, rinse well and dry with clean soft cloth to avoid water marks.
Wipe and dry brushed stainless steel in the same direction as the grain.
Do not use abrasive products.
To remove finger prints and give added shine use spray cleaners such as
Stainless Steel Magic ®and Shimmer _.
Lights replacement
Turn off electric power to hood before
removing light cover.
NOTE: Turn blowerand lights off. Make sure the lights are cool. If new lights
do not operate be sure lights are inserted correctly before calling service.
Light
Lightcover
Figure 16
•
Remove the light cover using a little flat screwdriver or similar tool as a lever.
•
Removethe damaged light and replacewith a new 12 Volt, 20 Watt (maximum)
halogen light made fora G-4 base. Follow package directions and do not touch
new light with bare hands.
•
Reinstall the light cover (snap into position).
10