Electrolux REX CA 962 ALU Руководство - Страница 4

Просмотреть онлайн или скачать pdf Руководство для Вентиляционная вытяжка Electrolux REX CA 962 ALU. Electrolux REX CA 962 ALU 15 страниц.

1 - GENERAL DATA

This hood has been designed to be wall-mounted above a cooking hob with one side

resting against a wall. It works either by suction (external outlet) or filter (internal

recycling). Because of the complexity and weight of the hood, its installation

should be carried out by qualified staff, taking care to respect all local

regulations on air discharge. The manufacturer cannot be found liable for any

damage due to improper installation.

The cooker hood is made up of the following components (fig. 1):

2.1 - No. 1 canopy C complete

with controls and worktop

illumination;

2.2 - No. 1 telescopic chimney

stack A complete with

ducting fan unit;

2.3 - No. 1 flange Ø 120 or Ø 150

2.4 - No. 1 venting grill G;

2.5 - No. 1 ducting spigot R;

2.6 - No. 1 support rod B;

2.7 - No. 1 fixing kit containing:

No. 1 wall bracket S to fix

the canopy hood;

No. 1 cover D, screws, rawl plugs and documentation.

3.1 - When used in the extraction mode the cooker hood ducting must not be connected to

a flue which is used for exhausting fumes from appliances supplied with energy other

than electric such as a central heating flue or water heating flue.

3.2 - Before connecting to the mains supply ensure that the mains voltage corresponds with

the voltage on the rating plate inside the hood.

3.3 - Connect the cooker hood to the mains via a double pole switch which has 3 mm

clearance between the contacts.

3.4 - The appliance must be earthed.

3.5 - When installed, the hood must be positioned at least 65 cm above a cooking appliance.

3.6 - Never do flambé cooking under this cooker hood.

3.7 - Never leave frying pans unattended during use as overheated fats and oils may catch

fire.

Part 1 - INSTALLATION INSTRUCTIONS

S36_01