TROUBLESHOOTING
EN
EN
PROBLEM
CNT
Water leaks from the
bottom of coffee maker.
Water leaks outside of
filter cup.
Acid (vinegar) taste
exists in espresso coffee.
The coffee maker cannot
work anymore or does
not respond at all.
The steam / milk frothing
does not work properly.
Steam indicator blinking
quickly
One-cup indicator
and two-cup indicator
blinking quickly
One-cup indicator, two-
cup indicator and steam
indicator blinking quickly
ALL indicators blinking at
the same time for 5 times
Filter handle is too tight
to operate
Coffee flows drip by drip
www.electrolux.com
POSSIBLE CAUSE
There is too much water in the
drip tray.
The coffee maker malfunctions.
There is some coffee powder on
filter edge when attached to the
brewing head.
Didn't perform descaling correctly
The coffee powder is stored in a
hot, wet place for a long time. The
coffee powder turns bad.
The power outlet is not plugged
well.
The white indicator is not
illuminated.
The container is too big or the
shape does not fit.
You have used skimmed milk
Continuously steaming for 3
minutes and the steam knob is
not reset.
Dispense 40ml of hot water and
the steam knob is not reset.
The steam knob is not reset after
cooling down.
Boiler temperature is too high.
The steam knob is not reset, but
the machine is turned on
Need descaling
Fill too much coffee powder in the
filter cup.
Too much coffee powder
Coffee powder is too fine, and
tamped too tight
Filter cup is blocked
SOLUTION
Please clean the drip tray.
Please contact with the authorized service
facility for repairing.
Clean the coffee powder on the filter edge.
Clean up machine according to step 1-4
for"start the machine for the first time"
Please use fresh coffee powder, or store
unused coffee powder in a cool, dry place.
After opening a package of coffee powder,
reseal it tightly and store it in a refrigerator
to maintain its freshness.
Plug the power cord into an earthed socket
correctly. If the appliance still does not
work, please contact with the authorized
service facility for repairing.
Only after the white indicator is illuminated,
the steam station can be used to perform
milk frothing.
Use high and narrow cup or professional
milk frothing jug.
Use whole milk or half-skimmed milk.
Reset steam knob to "OFF" position.
Reset steam knob to "OFF" position.
Cool it down by perform STEP 11
Reset steam knob to "OFF" position
Perform decalcifying
Fill filter cup with less coffee powder
Fill filter cup with less coffee powder
Use coarser coffee powder or tamp coffee
powder with less force
Clean the filter cup with cleaning pin
8
Печатать страницу