Electrolux WHL9036CN Руководство пользователя - Страница 3

Просмотреть онлайн или скачать pdf Руководство пользователя для Вентиляционная вытяжка Electrolux WHL9036CN. Electrolux WHL9036CN 28 страниц.

1. RECOMMENDATIONS AND SUGGESTIONS

• The Instructions for Use apply to several versions of this

appliance. Accordingly, you may find descriptions of indi-

vidual features that do not apply to your specific appliance.

• The manufacturer will not be held liable for any damages

resulting from incorrect or improper installation.

• The minimum safety distance between the cooker top

and the extractor hood is 650 mm (some models can be

installed at a lower height, please refer to the paragraphs

on working dimensions and installation).

• Check that the mains voltage corresponds to that indicated

on the rating plate fixed to the inside of the hood.

• For Class I appliances, check that the domestic power sup-

ply guarantees adequate earthing. Connect the extractor to

the exhaust flue through a pipe of minimum diameter 120

mm. The route of the flue must be as short as possible.

• Do not connect the extractor hood to exhaust ducts car-

rying combustion fumes (boilers, fireplaces, etc.).

• If the extractor is used in conjunction with non-electrical

appliances (e.g. gas burning appliances), a sufficient de-

gree of aeration must be guaranteed in the room in order

to prevent the backflow of exhaust gas. The kitchen must

have an opening communicating directly with the open

air in order to guarantee the entry of clean air. When the

cooker hood is used in conjunction with appliances sup-

plied with energy other than electric, the negative pressure

in the room must not exceed 0,04 mbar to prevent fumes

being drawn back into the room by the cooker hood.

• The air must not be discharged into a flue that is used for

exhausting fumes from appliances burning gas or other

fuels (not applicable to appliances that only discharge the

air back into the room).

• In the event of damage to the power cable, it must be

replaced by the manufacturer or by the technical service

department, in order to prevent any risks.

• If the instructions for installation for the gas hob specify

a greater distance specified above, this has to be taken

into account. Regulations concerning the discharge of air

have to be fulfilled.

ENGLISH