Bosch 8 V-LI Professional Оригинальное руководство по эксплуатации - Страница 9

Просмотреть онлайн или скачать pdf Оригинальное руководство по эксплуатации для Пылесос Bosch 8 V-LI Professional. Bosch 8 V-LI Professional 11 страниц. Precision saw
Также для Bosch 8 V-LI Professional: Оригинальное руководство по эксплуатации (9 страниц), Оригинальное руководство по эксплуатации (13 страниц), Оригинальное руководство по эксплуатации (13 страниц), Оригинальное руководство по эксплуатации (12 страниц), Руководство по эксплуатации (13 страниц), Руководство по эксплуатации (8 страниц), Оригинальное руководство по эксплуатации (16 страниц), Оригинальное руководство по эксплуатации (12 страниц), Руководство по эксплуатации (9 страниц), Оригинальное руководство по эксплуатации (12 страниц), Руководство по эксплуатации (36 страниц)

Печатать страницу
Bosch 8 V-LI Professional Оригинальное руководство по эксплуатации
OBJ_BUCH-840-002.book Page 19 Thursday, December 11, 2008 4:11 PM
Retighten the fastening screw 8 for the upper
cutter and the fastening screw 12 for the bot-
tom cutter with a tightening torque of 3–4 Nm.
Check the cutter clearance a (see "Adjusting
Cutter Clearance a", page 18).
Upper cutter 9 and bottom cutter 10 may not be
reground.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts order,
please always include the 10-digit article
number given on the type plate of the machine.
After-sales Service and Customer
Assistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be
found under:
www.bosch-pt.com
Our customer consultants answer your ques-
tions concerning best buy, application and
adjustment of products and accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88
Bosch Power Tools
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: +61 (01300) 307 044
Fax: +61 (01300) 307 045
Inside New Zealand:
Phone: +64 (0800) 543 353
Fax: +64 (0800) 428 570
Outside AU and NZ:
Phone: +61 (03) 9541 5555
www.bosch.com.au
Transport
The battery is tested according to UN document
ST/SG/AC.10/11/Rev.3 Part III, subsection 38.3.
It has effective protection against internal over-
pressure and short circuiting as well as devices
for the prevention of violent rupture and danger-
ous reverse current flow.
The lithium-equivalent content in the battery is
below applicable limit values. Therefore, the
battery is not subject to national or international
regulations pertaining to dangerous mediums,
neither as an individual component nor when in-
serted into a machine. However, the regulations
governing dangerous goods may be relevant
when transporting several batteries. In this
case, it can be necessary to comply with special
conditions (e.g., concerning the packaging). For
more information, please refer to the instruction
sheet (in English) under the following Internet
address:
http://purchasing.bosch.com/en/start/
Allgemeines/Download/index.htm.
1 609 929 S25 | (11.12.08)
English | 19