Electrolux AIRSPEED ZAS1000A Руководство пользователя - Страница 10
Просмотреть онлайн или скачать pdf Руководство пользователя для Пылесос Electrolux AIRSPEED ZAS1000A. Electrolux AIRSPEED ZAS1000A 12 страниц. Airspeed technology
Также для Electrolux AIRSPEED ZAS1000A: Руководство (12 страниц)
Печатать страницу
10
Trouble shooting
Problem
Motor will not start.
Vacuum does not clean
carpet or bare floor.
No suction at the
end of hose.
Turbo nozzle will not turn.
Vacuum is hard
to push.
Burning smell; brush roll
will not turn.
Cause
Power plug
Power switch
Thermal cut-off
Dustbin and filter
Air path selector
Belt
Hose
Bare floor setting
Carpet height setting
Dustbin and filter
Air path selector
Hose
Rotating brush
Vacuum height setting
Belt
Belt
Solution
• Push plug securely into outlet, try another outlet or
check circuit breaker.
• Step on power switch to turn vacuum on.
• See above.
• Empty dustbin, clean and/or change filter.
• Clean or replace filters regularly to maintain suction. Page 7
• If picking up fine dust, the dustbin may not look full, but a
fine substance tends to reduce suction when it blocks air
flow through the filter and screen. Refer to page 7 for filter
maintenance. Make sure filter, screen and dustbin are
installed properly.
• Turn selector knob to 'floors.'
• Replace a worn, cut or out of shape belt. Page 8
• Remove clogs from the hose that restrict the airflow. Make
sure hose is replaced into hose retainer. Page 8
• For bare floor cleaning, turn height adjustment knob to bare
floor position.
• Turn height adjustment knob to another position.
• Empty dustbin, clean and/or change filter.
• Clean or replace filters regularly to maintain suction. Page 7
• If picking up fine dust, the dustbin may not look full, but a
fine substance tends to reduce suction when it blocks air
flow through the filter and screen. Refer to page 7 for filter
maintenance. Make sure filter, screen and dustbin are
installed properly.
• Turn selector knob to 'tools.'
• Remove clogs from the hose that restrict the airflow. Make
sure hose is replaced into hose retainer. Page 8
• Check turbo nozzle for debris. Page 9
• If no suction at end of hose, turn selector knob to 'tools.'
• Adjust knob to a higher position.
• Replace a worn, cut or out of shape belt.
• Check brush roll for debris. Page 8
• Replace broken or out of shape belt. Page 8