Electrolux Classic Silence ZCS2000 Книга инструкций - Страница 8

Просмотреть онлайн или скачать pdf Книга инструкций для Пылесос Electrolux Classic Silence ZCS2000. Electrolux Classic Silence ZCS2000 12 страниц.

Печатать страницу

2 1

3 1

REPlACING THE DUST BAG, S-bag®

The dust bag, s-bag® must be replaced latest when

the indicator window is completely red. Read with the

nozzle lifted up.

Open the dust compartment cover.

Lift out the s-bag® holder.

Pull the cardboard to remove the s-bag® from the insert.

This automatically seals the s-bag® and prevents dust

leaking out.

5 a

Insert a new s-bag® by pushing the cardboard right into

the end of the groove in the insert

5 b

Place the dust bag holder back into the dust

compartment and close the lid.

Note: Replace the s-bag® after vacuuming carpet-cleaning

powder. Be sure to use only original s-bag® dust bags

www.s-bag.com

6-11 Replacing the motor filter (Ref No. EF1) Should be

done with every 5th replacement of the s-bag® dust bag.

Never use the vacuum cleaner without a filter.

Cleaning /replacing the exhaust filter:

Replace (or wash) the exhaust filter every year.

There are two types of exhaust filters:

• Micro filter (Ref No. EF17 this type of filter can not be

washed and must be replaced with a new one.)

• HEPA H12 Washable (Ref No. EFH 12W)

12 To replace the exhaust filter, open the exhaust

filter lid by pulling the back edge upwards.

Replace the filter.

14 Close the lid inserting the front hooks into the

rails. Push the lid forward and press down in the

centre until both sides click in.

Cleaning the HEPA H12 Washable Filter*

If you have a HEPA H12 Washable exhaust filter*,

wash the filter once a year. If the filter is damaged,

replace it with a new filter.

13 To clean the HEPA H12 Washable filter*, rinse the

inside (dirty side) in lukewarm tap water. Tap

the filter frame to remove the water. Repeat the

process four times. let dry thoroughly and then

reinsert into the cleaner as above.

Note: Do not use cleaning agents and avoid touching the

filter surface. let the filter dry completely before putting

back!