Drill Master 46055 Руководство по настройке и эксплуатации - Страница 8

Просмотреть онлайн или скачать pdf Руководство по настройке и эксплуатации для Электроинструмент Drill Master 46055. Drill Master 46055 13 страниц. Variable speed jigsaw

Печатать страницу

1. Blade Mounting

SPEcIFIcAtIOnS

Electrical Input

Speed Range

Maximum Cutting Depth 2-1/8"

Stroke

Blade Type

Cord

Includes 6 TPI and 24 TPI Blades and Tiltable Base

unPAcKInG

When unpacking, make sure the item

is intact and undamaged. If any parts are

missing or broken, please call Harbor Freight

Tools at 1-800-444-3353 as soon as possible.

BLADE MOuntInG

WARnInG! Do not attempt to mount a blade

unless the Jigsaw is unplugged from the

power source.

Blade Clamp

Blade

Loosen the Bolt on the Blade clamp

(21) with the hex Spanner (32).

Refer to Figure 1.

Insert the end (with holes) of the Blade

between the Blade Stock and the Blade

Clamp. Hold the Blade level while

Page 8

120 V~ / 60 Hz / 3.5 A

500-3000 SPM,

Six Speed Settings

3/4"

Universal (U) Shank

ITEM # 02713 - 14 Pc.

Jigsaw Blade Set.

18 Gauge, Two Prong Plug

E194601

Figure 1

Bolt

Blade Stock

For technical questions, please call 1-800-444-3353.

tightening the Bolt with the hex Spanner

(32).

note: To remove a Blade, loosen the Bolt and

remove Blade.

Figure 2

The Ball or guide must be positioned

before use. See Figure 2.

Using the

hex Spanner (32), loosen the

Bolt on the bottom plate.

Refer to Figure 2.

Slide the positioner so that the Ball is

touching the blade. Make sure you are

working with a straight blade.

note: If you are cutting synthetic plate or

metal, use a little cutting oil between

the Blade and the Ball. Metal cutting

is discussed in more detail later in this

manual.

REV 05b, 10d

SKU 46055