Drill Master 90798 Руководство по эксплуатации - Страница 12

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Ударный драйвер Drill Master 90798. Drill Master 90798 16 страниц. 18 volt - cordless

Печатать страницу
CHARGER BASE (50)
BATTERY (30)
Tabs
Tabs
NOTE: To connect the Charger Base (50)
to the Battery (30), press in the tabs on
the Battery while you slide the Charger
Base forward.
1.
When installing the Socket (49), make sure the Battery (30) is removed from the
Impact Wrench to avoid accidental starting. Then, firmly insert and lock in
place the Socket onto the 3/8" Impact Head of the tool.
2.
Whenever possible, secure the work piece in place, using a vise or clamps (not
included).
6.
Insert the fully charged Battery (30) into the Handle of the Impact Wrench, and
rotate the Battery 180 degrees to lock the Battery in place.
7.
Use the Forward/Reverse Button to select the turning rotation of the Impact
Wrench.
8.
Insert the Socket (49) onto the nut that is to be loosened/tightened. NOTE: If
using the accessory 1/2" Socket, the nut itself must be 1/2".
9.
Make sure to hold the Impact Wrench firmly with both hands, as torque from the
Motor will cause the tool to twist. Then, squeeze the Trigger Switch (21) to turn
on the Impact Wrench.
10.
When finished, release the Trigger Switch (21) to stop the Impact Wrench. Then,
remove the Battery (30) and Socket (49) from the tool.
SKU 90798
GREEN POWER
INDICATOR
RED CHARGING
FIGURE 1
OPERATING INSTRUCTIONS
PAGE 12
Tabs
LIGHT
CHARGER BASE (50)
INDICATOR
LIGHT
PLUG INTO
120 VOLT, GROUNDED,
ELECTRICAL OUTLET
FIGURE 2
REV 05/06