AirTechnic LOOP WL100H Эксплуатация и монтаж - Страница 3

Просмотреть онлайн или скачать pdf Эксплуатация и монтаж для Вентилятор AirTechnic LOOP WL100H. AirTechnic LOOP WL100H 5 страниц. Loop fan

•

Mounting the fan in vertical position "on a ceiling

or a roof" with direct air outlet outside is

prohibited.

automatically - depending on the model.

Fan models and accessories:

LOOP WL100, WL125 (Standard): the fan is equipped with a block to connect it to power supply. Speed

control is manual - after turning on/o a separate switch or a perimeter light switch.

LOOP WL100T, WL125T (Time Switch): speed is increased after turning on/o a separate switch or a

perimeter light switch. The fan switches to lower gear automatically after 30 min.

LOOP WL100H, WL125H (Humidity): speed is controlled automatically by the humidity sensor and timer:

• the fan changes to the second gear when the humidity level exceed 70%

• the fan changes to the rst gear automatically 15 min after the humidity level is detected to have decreased

below 70%

• if humidity does not exceed 70%, the speed is increased after turning on/o a separate switch or a perimeter

light switch. The fan changes to lower gear automatically after 15 min.

LOOP WL100R, WL125R (Movement Detection): speed is controlled automatically by the fan movement

detector and timer:

• the fan changes to the second gear automatically after presence (in a room) is detected and lasts more than

60 seconds

• the fan changes to the rst gear after 15 minutes since the last presence in a room is detected.

DESIGNATED USE

LOOP series axial extractor fans are designed to support residential building and utility room ventilation. They

are marked by quiet operation and low

energy consumption as well as high reliability and e ciency.

BASIC TECHNICAL DATA

LOOP series fans are support natural ventilation to achieve the required ventilation air ow volume according

to the PN-83/B-03430 norm.

The product is in compliance with the following European directives: The Low Voltage Directive (LVD)

2006/95/EC, Electromagnetic Compatibility (EMC) Directive 2004/108/EC, EMF Directive, RoHS2 Directive

2011/65/EU

Two-speed LOOP series

fans are designed for

continuous operation.

A second speed can be

activated

manually