Atlas SD72W Технические характеристики
Просмотреть онлайн или скачать pdf Технические характеристики для Динамики Atlas SD72W. Atlas SD72W 2 страницы. Atlas sound in-ceiling speakers
Также для Atlas SD72W: Технические характеристики (2 страниц), Инструкции по установке (1 страниц)
Печатать страницу
8" PREASSEMBLED SPEAKER PACKAGE W/ BAFFLE
SD72W
(Front View)
SD72W SPECIFICATIONS
Size
8
"
Power Handling
25 Watts Peak, 15 Watts RMS
Sensitivity
97dB Average
Impedance
8 Ohms Nominal
Frequency Response
45Hz-19kHz Nominal, 55Hz-8kHz ±5dB
Dispersion
105° (2kHz Octave Band, -6dB Points)
Diameter & Depth
8.125
Mounting Dimensions
7.625
Cone Material
Treated Paper
Surround Material & Damping
Damped Self Edge
Flux Density
10,600 Gauss, 1.06 Tesla
Magnet Weight
Nominal, 10oz. (260g)
Basket Material
Stamped Plated 20 ga. CRS
VC Diameter
1
"
VC Material
Copper
VC Former Material
Black Anodized Aluminum
VC Winding Width
.225
Top Plate Thickness
.239
Weight
32oz. (908g)
THIELE-SMALL PARAMETERS
Pe
15 watts
Fs
125Hz
Xmax
.03
Resistance
7.3 ohms
Qts
0.8
Qes
0.95
Qms
5.2
BL
7.9 N/A
Efficiency
1.90%
.32 (ft 3 )
Vas
33.2 (in 2 )
Sd
Le@1kHz
.36 mH
Mms
.39oz.
Cms
.024 in./lb.
Transformer Specifications
Frequency Response
100Hz-10kHz (±1.5dB)
Primary Taps (Watts)
.25, .5, 1, 2, & 5
Secondary Impedance (ohms)
8
Maximum Insertion Loss
1.5dB
Primary Termination
6
"
Core Size
⁄
"
1
2
Power Rating (Watts)
5
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
© 2005 Atlas Sound
(Rear View)
(205mm)
(205mm) Dia. & 2.875" (73mm) Deep
"
(194mm) Bolt Circle
"
(25mm)
"
"
"
(152mm) Com. Lead Color Coded
X
⁄
"
(16 X 16mm)
5
8
Specifications subject to change without notice
Printed in U.S.A.
FEATURES
• 10oz dual cone speaker provides familiar response & performance
• Quality 5 watt-dual voltage transformer
• Attractive CRS white powder coat baffle
• Individually packaged for stocking & ordering convenience
APPLICATION
The SD72 W is an aggressively priced, high quality speaker/baffle
transformer package suitable for most any paging or background
application including retail stores, restaurants, schools and other
institutional facilities.
GENERAL DESCRIPTION
The speaker used in the SD72 W is the next generation of Atlas high
performance cone loudspeakers, very similar to the preceding
C-Series speakers. The similarity in the sonic qualities ensures that
contractors and designers who have worked with the Atlas Sound
C-Series in the past will know exactly what to expect when they use
the SD72 W. Model SD72 W is a dual cone, 25 watt 8" (205mm)
loudspeaker with a 10oz. (260g) ceramic magnet. It includes a
curvelinear, treated paper cone for lower harmonic distortion. The
loudspeaker is also equipped with a full 1" diameter copper voice coil
with a black anodized aluminum former for better power dissipation.
Model SD72 W operates within a frequency response range of 45Hz-
19kHz (nominal) with a sensitivity of 97dB and a dispersion angle of
105°. Package includes factory installed 25/70.7V line matching trans-
former with tap selections ranging from .25 to 5 watts. The SD72 W
includes a factory installed CRS baffle with concealed loudspeaker
mounting studs and includes screw mount hardware. The SD72W
baffle features standard mounting holes to accommodate the majority
of Atlas Sound 8" tile bridges, mounting rings and enclosures. When
specifying mounting hardware be advised that the dimensions of the
SD72W baffle match the Atlas Sound Model 62-8. The baffle finish is
white powder coat epoxy.
ARCHITECT & ENGINEER SPECIFICATIONS
Unit shall be Atlas Sound 8" loudspeaker Model SD72 W utilizing line
matching transformer and white CRS baffle. It shall have a (10oz.)
ceramic magnet and a seamless cone. Frequency response range
shall be 45Hz-19kHz (nominal). Sensitivity shall be 97dB 1W/1M.
Voice coil shall be black anodized aluminum to help dissipate
heat, have an impedance of 8 ohms and a diameter of 1" (25mm).
Transformer primary voltage shall be 25V/70.7V with a frequency
response range of 45Hz-19kHz (nominal). Insertion loss shall not
exceed 1.5dB. Unit shall include factory installed CRS baffle. Baffle
shall include welded speaker mounting studs and all necessary
hardware to match the baffle to associated optional hardware. Baffle
overall diameter shall not exceed 12
ished in white powder coat epoxy.
AtlasSound.com
000305
ATS001451 RevB 3/05
SD72W
⁄
" (324mm) Baffle shall be fin-
3
4
SL1-2022
2.49