CP400 & CP700 COMMERCIAL
POWER AMPLIFIER
SPEAkER OuTPuT WIRINg
Low Impedance Direct Coupled Output (Stereo)
For direct coupled operation into 2, 4, and 8 Ω loads, connect the loudspeaker leads to the barrier strip
connections labeled "Direct Output"; connect the hot lead to the "+" terminal and the common lead to
the "-" terminal. The use of heavy gauge wiring is recommended to avoid voltage drops, which can occur
as a result of wasted power in the cable. Contact Atlas Sound Tech Support (1-800-876-3333) for sug-
gestions on cable capacities. Be sure you know the quantity of speakers and cable lengths before calling
(Figure 5).
Low Impedance Direct Coupled Output (Parallel Mono)
Observe the speaker connection information in the preceeding paragraph (Stereo Direct Coupled Output).
With the amplifier turned OFF, move the rear mounted selector switch to the "Parallel" position and con-
nect your mono input wiring to either the channel one or channel two inputs. Both channels will be driven
from this mono signal (Figure 6).
1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. •
©2008 ATLAS SOUND LP
CH-1
CP700
Commercial
Power
Amplifier
To direct coupled
Per Channel
loudspeakers
Output Power
400 W / 4 Ohms
350 W / 70.7 V
CH-2
To direct coupled
AC100V-50/60Hz
loudspeakers
AC120V-50/60Hz
AC230V-50/60Hz
AC240V-50/60Hz
POWER
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
Specifications are subject to change without notice
AtlasSound.com
Printed in U.S.A.
AUDIO TRANSFORMER
8, 4, and 2 Ohms
+
-
0
D I R . O U T P U T
-
+
70V
BRIDGE
MONO
- 100V +
AUDIO TRANSFORMER
8, 4, and 2 Ohms
+
-
0
D I R . O U T P U T
-
-
70V
BRIDGE
MONO
- 100V +
White
Black
Shield
TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435
OWNER'S MANUAL
CH-1
70
100
I S O L . O U T P U T
+
-
+
25V
CH-2
70
100
I S O L . O U T P U T
+
-
+
25V
Figure 5
MADE IN CHINA
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
Optional Jumpers
See Note on Page 6
Switch set
to "Parallel"
Figure 6
ATS002102 RevD 2/08
Switch set
to "Stereo"
PP
9