Atlas I128SYS Технические характеристики - Страница 2
Просмотреть онлайн или скачать pdf Технические характеристики для Акустическая система Atlas I128SYS. Atlas I128SYS 2 страницы. Informacast ip compliant loudspeaker system powered by cisco poe network switches
Печатать страницуUnit shall be Atlas Sound Model I128SYS. The loudspeaker system
shall include factory assembled loudspeaker, IP addressable PCB
amplifier/control/metal baffle and enclosures. The loudspeaker shall
have a 10 oz (260 g) ceramic magnet and a seamless cone. Frequency
response range shall be 86 Hz to 8 kHz (-3 dB). Sensitivity shall be
94 dB average. Voice coil former shall be black anodized aluminum to
help dissipate heat, have an impedance of 8 Ω and a diameter of
1" (25 mm). The IP addressable PCB amplifier/control shall be
mounted to the rear of the loudspeaker baffle via concealed weld
Loudspeaker Specifications
Speaker Size
8" (203 mm)
Power Handling
15 W
Sensitivity (SPL @ 1 W/1 M)
94 dB
1
Frequencey Response
86 Hz to 8 kHz
2
Dispersion
52.5˚
Cone Material
Treated Paper
Surround Material & Dampening
Dampened self-storage
Flux Density
10,600 Gauss, 1.06 Tesla
Magnet Weight
Nominal, 10 oz (260 g)
Basket Material
Stamped, Plated 20-gauge CRS
Voice Coil Diameter
1" (25 mm)
Voice Coil Material
Cooper
Voice Coil Former Material
Black Anodized Aluminum
Voice Coil Winding Width
0.225 (6 mm)
Top Plate Thickness
.239 (96 mm)
Weight
32 oz (908 g)
Diameter & Depth
8.125" (206 mm) Dia. & 2.875" (73 mm) D
Mounting Dimensions
7.625" (194 mm) Bolt Circle
1. Measured in reccomended enclosure
2. 3 dB down point, 2 kHz octave band
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
© 2007 Atlas Sound LP
ARCHITECT AND ENGINEER SPECIFICATIONS
Baffle Specifications
Baffle material
Speaker grille material
Loudspeaker cut-out dimension
Overall Width x Height
Depth - Front of baffle to rear of enclosure
Color
Amplifier/Controller Specifications
Power Rating
Inputs
Outputs
Power Source
Dimensions
Mounting
Network Control
Specifications subject to change without notice
Printed in U.S.A.
studs. The amplifier / control PCB shall be capable of producing 9
Watts RMS with a minimum of 9VDC power provided either locally
or via Cisco IEEE 802.3AF compliant POE switches. Interconnect
shall be via female RJ-45 connector mounted to the PCB. All control
functionality of the PCB amplifier shall be determined via software. The
metal loudspeaker baffle overall dimensions shall be 11.94" (303 mm)
wide by 23.67" (601 mm) tall. Baffle construction shall be of 18-gauge
cold rolled steel. Finish shall be Atlas Sound neutral white electrostatic
powder coat. Enclosure shall be included.
9W RMS into 8 Ω load with 9VDC in
RJ-45 female on PCB accessable from rear of baffle
2 wire main ± terminated to loudspeaker
Cisco IEEE 802.3AF compliant POE network switches
local 12-18VDC PSU
4.25" (108 mm) by 7.25" (184 mm)
4 holes to weld studs on baffle (factory assembled)
Berbee Informacast on multicast enabled networks
AtlasSound.com
ATS002967 RevA 11/07
18-gauge CRS
22 gauge perforated steel
9.125" (232 mm) x 6.5" (175 mm)
11.94" (303 mm) W x 23.67" (601 mm) H
4.89" (124 mm)
White
SL1-3038