Atlas Melody AC-MGM2 Руководство по эксплуатации - Страница 9

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Вентилятор Atlas Melody AC-MGM2. Atlas Melody AC-MGM2 9 страниц. Wall mounted fan

Matthews Fan CO Atlas brand oscillation fans are mechanical and

so, depending upon the amount of use your new fan receives and

the climate in which it is installed, it may need its oscillation

mechanism greased approximately every 6 months or as needed if

oscillation noise occurs.

Step1.

Gingerly remove the motor back cap. Unscrew the x4 screws holding it to the frame while holding onto

the front motor cap and blade/cage assembly so that it does not fall forward. After the x4 screws are

removed, you may need to pull forward the front cap assembly a 1/4" to pull off the motor back cap. DO

NOT MOVE THE MOTOR HEAD ASSEMBLY SIDE TO SIDE, DOING SO WILL STRIP OSCILLATION

MOTOR GEARS. When the back motor cap is fully removed, replace one of the just-removed screws

back into the front motor cap and frame assembly temporarily to hold the front motor cap and blade/cage

in place while you grease your oscillation mechanism.

Step2.

Use a lithium based grease on all moving parts and joints of the oscillation mechanism - the push arm

and cam of the oscillation motor.

Step3.

To replace the motor back cap, hold onto the front motor cap and blade/cage assembly. Remove the

temporary screw and align the screw holes between the front and back caps. Replace and tighten the x4

screws.