ABSCO SHEDS 15081SK Руководство - Страница 5

Просмотреть онлайн или скачать pdf Руководство для Хранение на открытом воздухе ABSCO SHEDS 15081SK. ABSCO SHEDS 15081SK 19 страниц. Space saver shed

SNAPTiTE ASSEMBLY GUIDE

The Snaptite Assembly System locks end channels to all roof and wall sheets without the need for

tools and fasteners.

To assemble each panel, the perimeter channels are secured to the top and bottom of each panel.

Gently tap the channel over the SNAPTiTE lugs on the sheet, working along the sheet.

Each perimeter channel must ﬁ nish ﬂ ush with the edges of the sheets. Simply tap the channel along

the sheets until each end is neatly ﬂ ush. If you need to remove channels from the panels, slide it off

from the side.

FASTENING SYMBOLS

Secure channel to sheeting by SNAPTiTE

SNAP

T TE

fastening method.

Join components together with one

screw at this location only, as some

channels have extra holes that are not

required for this model of shed.

Do not join components together at

this location yet, as the screws may

obstruct further assembly of the other

components.

Absco Industries

ABSCO SPACE SAVER SHED

MODEL: 15081SK

1.52mW x 0.78mD x 1.80mH, 1.95mH

Assembly Instruction Manual

Channel locks the shed panel into

position without the need for screws!

Join components together by pre-drill-

ing the holes ﬁ rst. Use one component as

template to mark where the holes are and

drill with a 3mm drill bit.

3mm pop rivet

4mm nut and bolt set.

Model: 15081SK

11/11/19

1.1