Bose 402 Series Руководство по эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Динамики Bose 402 Series. Bose 402 Series 9 страниц.

DISASSEMBLY/ASSEMBLY PROCEDURES

6. Crossover Replacement

6.1 Replace the two screws (7) securing the

crossover PCB (3) to the cabinet.

6.2 Perform procedure 4 and 2.

7. Speakon Connector Removal

7.1 Perform procedure 3.1-3.3 to remove the

two center drivers.

7.2 Using a flat-blade screwdriver, pry out the

tinnerman clip (5) securing the Speakon

connector (4) to the cabinet.

Tinnerman Clip

7.3 Pull out the Speakon connector and

remove the wires.

8. Speakon Connector Replacement

8.1 Referring to figure 1, attach the wires to

the Speakon connector (4).

8.2 Align the Speakon connector in the

cabinet.

8.3 Reshape the tinnerman clip (5) or use a

new one. Place an appropriate size wood

block between the Speakon connector (rear

of speaker) and a hard surface. Using a flat-

blade screwdriver (or similar tool) and a

hammer, secure the tinnerman clip into place.

Make sure the Speakon connector is securely

fastened.

Speakon

Connector

Figure 4. Schematic Diagram