Bose 901 Руководство пользователя - Страница 11

Просмотреть онлайн или скачать pdf Руководство пользователя для Динамики Bose 901. Bose 901 23 страницы. Vi direct/reflecting speaker system
Также для Bose 901: Руководство пользователя (41 страниц), Инструкции по сборке и монтажу (1 страниц), Руководство пользователя (12 страниц), Руководство по установке и эксплуатации (15 страниц), Руководство пользователя (20 страниц)

Figure 7

Home theater receiver

connections

AM195438_03_V.pdf

2. Use the twin cable assemblies (with two connectors at each end) that are supplied with the

equalizer. Use one connector for the right (R) channel connections and the other connector

for the left (L) channel connections.

3. Connect the amplifier INPUT of the Bose

of the receiver or amplifier. Connect right channel to right channel and left to left.

4. Connect the amplifier OUTPUT of the active equalizer to the MAIN AMP IN jacks on the

receiver or amplifier. Connect right channel to right channel and left to left.

5. Plug the power cord of the 901 active equalizer into one of the switched outlets on the

receiver so that it will be powered when the receiver is switched on.

Note: This connection method does not allow you to connect a tape deck directly to the active

equalizer. Connect it to the receiver instead.

Check to see that the 901 speakers are connected to the receiver MAIN or FRONT speaker

jacks. In this way the 901 active equalizer signals will reach only the 901 speakers – the front

channels of your home theater – and not any non-901 speakers used as center and surround

channels.

Call Bose Corporation for assistance with the connection of additional speakers or signal

processing equipment. Refer to the address information inside the back cover of this guide.

A free booklet is available (USA only): Guide to Optional System Connections for Bose 901

Direct/Reflecting

Speaker Systems. Ask for part number 149393.

November 21, 2001

901

active equalizer to the PRE AMP OUT jacks

Setting Up