Bose Acoustimass 3 Series Руководство - Страница 17

Просмотреть онлайн или скачать pdf Руководство для Динамики Bose Acoustimass 3 Series. Bose Acoustimass 3 Series 43 страницы. Powered speaker system
Также для Bose Acoustimass 3 Series: Руководство пользователя (17 страниц), Руководство пользователя (10 страниц), Руководство по эксплуатации (42 страниц)

3. Twiddler Removal

A. Remove Grille from enclosure. Use

Procedure 1.

B. Remove the 4 screws (3) holding the twiddler

(2) in place. Lift the twiddler out and cut the wires

connected to the twiddler as close to it's

terminals as possible.

4. Twiddler Replacement

A. Strip the wires and connect them to the

replacement twiddler (2).

NOTE: The positive (+) terminal of each twiddler

is marked with a red dot.

B. Connect the red wire to the positive (+)

twiddler terminal and the black wire to the

negative (-) twiddler terminal.

C. Lower the twiddler into the satellite enclosure

and secure the twiddler to the enclosure with 4

screws (3). Repeat the satellite test procedures.

D. Return the Grille Assembly to the front of the

Satellite Enclosure.

7. Connector Removal

Use Procedure 1 and 3 to access the inside of

the satellite enclosure.

A. After the twiddler has been removed, pull out

the polyester batting (4) from the enclosure.

B. Use a pair of pliers to press the connector's

(6) release snaps together. Push the connector

out of the enclosure.

C. Cut the wires to the connector as close as

possible.

8. Connector Replacement

A. Strip the wires and connect them to the

replacement connector (6).

NOTE: The positive (+) terminal is marked red.

B. Connect the red wire to the positive (+)

terminal and the black wire to the negative (-)

terminal.

C. Press the terminal into the back of the

enclosure until it snaps into place.