Atlas Copco PBE 6 S Инструкции по ремонту - Страница 11
Просмотреть онлайн или скачать pdf Инструкции по ремонту для Сверло Atlas Copco PBE 6 S. Atlas Copco PBE 6 S 11 страниц.
Печатать страницу
1
Mounting the
Mount the carbon brushes (3) and mount
carbon brushes
the cable lugs (h) and (i) on the field.
2
Insert the carbon brushes (3) into the
brush holders (4).
3
Pull up the brush springs (5) of the brush
holders (4) and push them over the carbon
brushes (3).
4
Fasten the carbon brush covers (2) with
the screws (1).
1
Mounting the ball
Fit the locking bolt (4) together with the
holding device
ball holding device (5).
2
Fit the pressure spring (6) and the retain-
ing plate (2), depress them and insert the
locking levers (3).
3
Mount the locking sleeve (1).
1
Mounting the
Mount the damper (7) and the damping el-
auxiliary handle
ement (8) and secure them with the lock-
ing ring (9).
2
Fit the rubber sleeve (A).
3
Push back the rubber sleeve (A) and
mount the rubber bushing (5).
4
Press the clamping ring (1) and place the
auxiliary handle (4) on the clamping
ring (1).
5
Insert the screw (6) through the clamping
ring (1) and the auxiliary handle (4).
6
Push the washer (3) over the screw (6).
7
Secure the screw (6) with the nut (2).
Test Run
Test run the machine and pay attention to noises.
Let the machine run-in.
Electrical Test
Perform an electrical test on the machine (see chapter Electrical and Mechanical Test Instructions).
Repair Instructions No.182.03/98
h
3
2
1
1
2 3
3
2
1
PBE 6 S
4
5
i
6
5
4
3
4
5
6
A 9
8 7
PAGE
10
8
9
10