Atlas Copco PHE 26 RA Инструкции по ремонту - Страница 10

Просмотреть онлайн или скачать pdf Инструкции по ремонту для Сверло Atlas Copco PHE 26 RA. Atlas Copco PHE 26 RA 12 страниц.

Assembling the

1 Push the following parts onto the back

back gear shaft

gear shaft (3) in this order:

- washer (4)

- spring (5)

- coupling box (6)

- washer (7)

- tumble drive (2)

2 Press on the gear wheel (1) with a

distance of 0.05 mm to the tumble drive

(2) (illustration A). The smooth surface

must face the tumble drive (2).

3 Insert the locking ring (8).

Mounting the

1 Insert the guide ring (4) and the bolt (3)

back gear shaft

into the cylinder (2).

and the cylinder

2 Insert the rolls (6) into the back gear shaft

one after the other and fix it with grease.

cage (from date of manufacture 06/96).

3 The back gear (7) can only be inserted as

follows:

– Put together the cylinder and the back

– Turn the tumble drive to the lowest

– insert the cylinder into the end shield

– Insert the tumble drive into the

4 Grease the striker (1) and insert it into the

cylinder.

Mount the rolls (6) completely with the

gear for adjustment before mounting

them.

position and leave it there

mounted cylinder.

Repair Instruction No. 174.3/95

Illustration A

PHE 26 RA

0,05 mm

3 4

PAGE