Bose Wave radio Series III Руководство пользователя - Страница 7

Просмотреть онлайн или скачать pdf Руководство пользователя для Динамики Bose Wave radio Series III. Bose Wave radio Series III 26 страниц. Enabling standby low power mode
Также для Bose Wave radio Series III: Краткое руководство по эксплуатации (2 страниц), Краткое руководство по эксплуатации (2 страниц)

Connecting the power cord

Figure 3

Connecting the power cord

1. Plug the small end of the power cord into the power jack on the back of your radio

(Figure 3). The connector is shaped to fit in only one direction. Line up the flat edge of the

plug with the flat edge on the side of the jack.

2. The FM antenna is built into the power cord. To improve FM reception, unwind the power

cord completely.

3. Plug the other end of the power cord into an electric outlet.

4. The display panel lights and the time display begins flashing.

5. Press the CLOCK SET button once to stop the flashing.

Flat edge

of connector

To connect your radio to the FM signal available from some cable TV companies, contact

your cable provider for assistance. The connection is made to the FM 75Ω EXTERNAL

antenna connector on the back of the radio.

CAUTION: Be certain that the installation includes a signal splitter so that only the FM band,

not the cable TV band, is transmitted to the radio. It is necessary to use a splitter that filters

the signal to prevent any re-emissions of the TV spectrum through the radio.

Setting Up