L1
Model II
®
portable line array system
Descriptive Data (continued)
Inputs, Controls and Indicators
Power Indicator
Power Switch
AC Mains
Analog Signal/Clip LED
Trim
Input
Channel Gain
Max Input Signal (Analog input)
Input Impedance
Bass Module Out (for B1 bass module only)
Bass Line Output
ToneMatch
Port
®
Physical Properties
Grille
Net Weight and Dimensions
L1
®
Model II Power Stand
L1 Model II Cylindrical Radiator
®
B1 Bass Module
Shipping Weight
L1 Model II Power Stand
L1 Model II Cylindrical Radiator
®
B1 Bass Module
Voltages
USA/Canada
Europe
2
OF 8
p r o . B o s e . c o m
Loudspeakers
Loudspeakers
Blue LED = ON
Red = FAULT
Switch system power on and off
IEC Connector
Green = Signal Present
Yellow = -3 dB below clip
Red = Clip (limiter active)
+14 dB @ max
¼" – TS Unbalanced or TRS Balanced
-50 dB to +24 dB (Line)
+24 dBu, (Balanced)
10 kΩ +/-10% (Unbalanced)
NL4 connector (all pins wired, two for audio, two for auto sensing)
Bass output signal for driving one or two B1 bass modules.
(1 B1 bass module = 8 Ω) (2 B1 bass modules = 4 Ω)
Post-DSP bass signal output.
Accepts a ¼" TRS cable.
Supplies low-frequency signal for connecting a PackLite
amplifier or powered sub woofer.
CAT5 Ethernet cable with RJ45 connection providing digital audio and
power connection for the optional T1 ToneMatch audio engine.
Powder-coated steel
23.7 lbs. (10.7 kg)
5" H x 10" W x 27" D (128 mm x 262 mm x 692 mm)
L1 Model II Cylindrical Radiator
loudspeaker top
®
16.3 lbs. (7.4 kg)
43.5" H x 3.7" W x 4" D (1105 mm x 89 mm x 105 mm)
L1 Model II Cylindrical Radiator
loudspeaker bottom
®
17.4 lbs. (7.9 kg)
43.5" H x 3.7" W x 4" D (1105 mm x 89 mm x 105 mm)
26.6 lbs. (12.1 kg)
14.5" H x 10.25" W x 17.75" D (381 mm x 260 mm x 450 mm)
32 lbs. (14.5 kg)
41 lbs. (18.6 kg)
30 lbs. (13.6 kg)
100-120 V 50 / 60 Hz 500 W
220-240 V 50 / 60 Hz 500 W
power
®
Печатать страницу