Bose RoomMatch Руководство по установке - Страница 2

Просмотреть онлайн или скачать pdf Руководство по установке для Акустическая система Bose RoomMatch. Bose RoomMatch 24 страницы.

Печатать страницу

Important Safety Information

This product is intended for installation by professional installers only! This document is intended to provide professional

installers with basic installation and safety guidelines for Bose RoomMatch™ loudspeakers in typical fixed-installation systems.

Please read this document before attempting installation.

WARNING: All Bose

responsibility to ensure installation of the loudspeakers and mounting system is performed in accordance with all applicable

codes, including local building codes and regulations. Consult the local authority having jurisdiction before installing this

product.

WARNING: Unsafe mounting or overhead suspension of any heavy load can result in serious injury and equipment damage. It

is the responsibility of the installer to evaluate the reliability of any mounting method used for their application. Only professional

installers with the knowledge of proper hardware and safe mounting techniques should attempt to install any loudspeaker

overhead.

Guidelines for Permanent Installation of RoomMatch™ Array Module Loudspeakers

The installation information contained in this document is only a general guideline and cannot, as such, represent all requirements and

precautions. Accordingly, anyone using this material assumes all liability and is expressly responsible for the safety of all loudspeaker ar-

ray designs and mounting configurations applied in practice.

1) Prior to the installation of any overhead loudspeaker, a licensed professional engineer must approve the location and method of

attachment to the building structure and confirm they are consistent with all building codes and regulations. Ensure the mounting

surface and the method of attaching the loudspeaker system to the surface is capable of supporting the total weight of the system.

A safety factor of 10:1 is recommended.

2) Obtain all mounting system components from reputable manufacturers. Select a mounting system appropriate for your loudspeaker

system and its intended application. We recommend Bose mounting accessories when available. A licensed professional engineer

must review the design and fabrication of any custom mounting hardware.

3) Bose RoomMatch™ array module loudspeakers feature an integrated side-plate rigging system, designed to facilitate loudspeaker

array mounting by professional installers. Module to module connections should be made using only the integrated rigging side

plates with the included M10 graded fasteners. Do NOT use SAE 3/8" size threaded hardware! Use only metric hardware. Fasteners

should be metric Class 10.9 (load bearing rated) or equivalent. Unmarked (not rated for load bearing) fasteners should not be used.

4) Do not suspend loudspeaker using handles as attachment points. Handles are NOT designed for load bearing!

5) Use lock washers or a locking compound intended for hand disassembly, such as LOCTITE

pound, for a vibration resistant assembly.

6) Fasteners should be tightened using torque of 35 to 40 foot-pounds (47 to 54 Newton-meters). Over-tightening the fasteners could

result in irreparable damage to the cabinet and create an unsafe assembly.

7) Do not attempt to alter the threaded attachment points or re-thread the attachment points to accommodate any other thread size or

type; doing so will compromise the safety while permanently damaging the loudspeaker.

8) Use a safety cable, separately attached to the cabinet, at a point not in common with the load bearing attachment points of the

mounting system to the loudspeaker. This is recommended even if not required by local regulation. Consult a licensed professional

engineer or a rigging professional for proper design and installation.

CAUTION: Installed loudspeaker arrays require regular inspection and routine maintenance to ensure proper function and

safe operation. Inspect mounting hardware and attachments for signs of corrosion, bending or any other condition that may

decrease the structural integrity. Immediately replace worn or damaged components.

CAUTION: Make no modifications to the loudspeakers or mounting accessories. Unauthorized alterations may compromise

safety and could result in damage, injury, or death.

CAUTION: Never exceed 8 RoomMatch modules using the integrated rigging side plates for arrays. Please refer to product

labels and the Array Design and Installation Guide document for Working Load Limit data.

Page 2

Installation and Safety Guidelines

products must be used in accordance with local, state, federal and industry regulations. It is the installer's

pro.Bose.com

THREADLOCKER BLUE 242

com-