®
UNIFY
system overview
The UNIFY intelligent integration system guides you through the initial process of setting
up and configuring your system. It helps you to choose the right cables and inputs, and
to program the Bose remote to operate your connected devices.
After completing the initial setup, you can use the UNIFY system at any time to change
your system setup and configuration.
Using the UNIFY menu
To display the UNIFY menu on your TV, press the Setup button on the front of the control
console. Using the navigation buttons on the remote, select the function you want and
follow the instructions on the screen.
Menu item
Resume initial setup
Restart initial setup
Reconnect
®
Acoustimass
(135 systems only)
Language
®
ADAPTiQ
TV setup
Source setup
Add a new device
Homewide
(135/235 and V25/V35
systems only)
Update
Teach mode
Exit UNIFY
C
What you can do
If your initial setup is incomplete, you can return to the UNIFY setup
process at the last completed event.
If your initial setup is incomplete, you can start the UNIFY setup process
from the beginning.
Follow the on-screen instructions to reconnect the speaker array with the
Acoustimass module.
Change the language of the on-screen display.
Start the ADAPTiQ audio calibration process.
After your TV is connected to the console, you can:
• Program the LIFESTYLE
• Manually enter remote control IR device codes
• Replace your TV
• Add, change, or remove the TV audio connection
For sources connected to Input 1-5 of the control console, you can:
• Change the name of the device
• Program your remote to control the device and add the IR emitter
• Manually enter remote control IR device codes
• Remove the device
• Add or change the type of audio or video connection
After your initial setup is complete, you can add another device or
accessory to your system.
This menu item allows you change house and room codes if you are
expanding your system to deliver sound in other rooms of your home. See
"Adding Sound to Another Room (235/135/V35/V25 only)" on page 26.
Used to perform a system software update (see "Performing a system
software update" on page 29 for more information).
This item is used to send IR codes to program a learning remote.
Closes the UNIFY menu and returns you to the last source selected.
Y
HANGING
OUR
®
remote to control your TV
S
S
YSTEM
ETUP
English – 25
Печатать страницу