Bose Panaray 502A Руководство по установке - Страница 9

Просмотреть онлайн или скачать pdf Руководство по установке для Стереосистема Bose Panaray 502A. Bose Panaray 502A 32 страницы. Full-range-driver array loudspeakers
Также для Bose Panaray 502A: Техническая информация (4 страниц), Руководство по установке (12 страниц), Руководство (4 страниц), Руководство по установке (24 страниц)

pro.Bose.com

Panaray

802

Series IV loudspeaker mounting options

Panaray

802

Series IV loudspeaker U-bracket (for indoor or outdoor use)

The Bose

802 Series IV loudspeaker can be mounted on a wall or ceiling using the U-bracket accessory kit (not included).

Recommended Tools: 5 mm Allen wrench

CAUTION: 802 Series IV loudspeakers weigh 13.6 kg (30 lb). Use caution when lifting to avoid injury and/or damage to the loudspeaker.

Do not rest loudspeakers on their grilles.

Choose a mounting location that will safely support the weight (13.6 kg (30 lb)) of the loudspeaker. Refer to "Guide-

lines for permanent installation of Bose

CAUTION: Choose a position and mounting method consistent with local building codes and regulations. Ensure the mounting

surface and the method of attaching the loudspeaker to the surface is structurally capable of supporting the weight of the

loudspeaker. A 10:1 safety weight ratio is recommended.

Hold the U-bracket in the mounting location and mark the holes.

Drill four holes and mount the bracket using all four screws.

Remove the backing from the foam tape and attach a bracket spacer to each side of the loudspeaker. Insert an M8

cap screw into the front hole on each side of the loudspeaker. Do not tighten.

Panaray

loudspeakers" on page 3.

Installation