Listening to Radio
Selecting the radio band
Press Radio to turn on the radio to the station last
selected. Press Radio as necessary to select FM or AM.
Listening to FM or AM radio
When you select FM radio, Radio Data System (RDS) information
for the current station is displayed. This is controlled by the RADIO
TEXT setting in the setup menu. To disable RDS and view only the
station frequency, change the RADIO TEXT setting to OFF. See
"Turning RDS on or off" on page 23.
RDS information displayed (RADIO TEXT- ON):
No RDS information displayed (RADIO TEXT- OFF):
Tuning to an FM/AM station
When you press Radio, Seek/Track, or Tune/mP3 to tune to a
radio station, the frequency appears in the center of the display
while you are tuning.
• Press Seek/Track
station with a strong signal;
• Press Seek/Track
cy station with a strong signal.
• Press Tune/mP3 < to manually tune to a lower
frequency.
• Press Tune/mP3 > to manually tune to a higher
frequency.
• Press and hold Tune/mP3 < to rapidly lower
the frequency.
• Press and hold Tune/mP3 > to rapidly increase
the frequency.
Note: If AM reception is weak, rotate your Wave
music system clockwise or counterclockwise to improve
AM reception. If FM reception is weak, make sure the power
cord is straightened as much as possible. To improve FM
reception, you can install an external FM antenna. See
"Using an external antenna" on page 21.
14 - English
RDS information
Station
frequency
Station frequency
while tuning
to find a lower-frequency
to find a higher-frequen-
SoundTouch™
®
Storing FM/AM radio station presets
You can store up to six FM and six AM radio stations
for quick recall using the Presets buttons.
1.
Tune to the station you want to save as a preset.
2.
Press and hold one of the six Presets buttons until you hear
a double tone and the preset number and station frequency
appear on the display.
3.
Press one of the Presets buttons to quickly tune to a
previously stored FM or AM station.
Note: Storing a preset will replace any station previously stored to
that preset number.
TALK RADIO mode
Talk radio broadcasts can be greatly affected by either the
microphone selection or the boosting of low frequencies by some
radio stations. They do so in an attempt to improve speech when
heard through conventional radios. In high-quality audio products,
this results in sound that is unnatural or bass heavy. By selecting
the TALK RADIO mode, your Wave
automatically adjusts to compensate for artificially boosted low
frequencies.
When the radio is playing, press Play mode twice to turn
the TALK RADIO mode on (TALK RADIO– ON) or
off (TALK RADIO– OFF).
Note: The TALK RADIO setting is automatically cancelled when
you tune to another station, switch to another source, or
turn your Wave
SoundTouch™ music system off.
®
SoundTouch
music system
®
TM
Печатать страницу