Bose Wave music system Руководство пользователя - Страница 9

Connecting the power cord

Figure 3

Connecting the power cord

Figure 4

Connecting and setting up the

FM antenna

1. Plug the power cord into an electric outlet (Figure 3). The display panel lights, and the time

display begins flashing.

2. Press and hold either Time

CAUTION: Bose recommends using a quality surge suppressor on all electronic equipment.

Voltage variations and spikes can damage electronic components in any system. A quality

suppressor, which can eliminate the vast majority of failures attributed to surges, may be

purchased at electronic stores.

1. Plug the FM antenna into the FM 75Ω EXTERNAL connector on the back of the radio

(Figure 4).

2. For best FM tuning performance, straighten the antenna and extend the arms as far away

from the radio as possible. Avoid placing the antenna next to a metal surface. See the

recommended antenna orientation in Figure 4.

FM 75Ω EXTERNAL connector

If you subscribe to cable radio or have a connection for an outdoor antenna, you can use the

coaxial cable to connect to the radio.

1. Plug the coaxial cable into the FM 75Ω EXTERNAL connector on the back of the radio

(Figure 4).

2. Connect the other end of the coaxial cable to the outlet in your wall.

CAUTION: Be certain that the installation includes a signal splitter so that only the FM band,

and not the cable TV band, is transmitted to the radio. It is necessary to use a splitter that

filters the signal to prevent any re-emissions of the TV spectrum through the radio.

button to stop the flashing and set the time.

Setting Up