Bose Wave music system Руководство пользователя - Страница 11

Connecting an external

audio source

With the Multi-CD changer connected, any external

audio devices you may have used with your Wave

music system can be connected to the back of the

Multi-CD changer. However, you now need a dual RCA

stereo cable.

The Wave

music system Multi-CD Changer provides

two rear panel inputs (AUX 1 and AUX 2) for external

audio devices such as TV, VCR, DVD player, cassette

player, or MP3 player. This gives you the advantage of

hearing Wave

music system sound from a range of

sources.

To connect a device, connect one end of the cable to the

audio output jacks of the source and the other end to

one of the AUX inputs on the changer. Be sure to match

the red and white plugs on the cable to the red (R) and

white (L) AUX jacks on the changer.

Connection example:

Red

Dual RCA stereo cable

Use only a stereo connection. You will not hear

the connected device if just the left (L) or right (R)

channel is connected.

Red

Playing a connected audio

source

To listen to a connected source:

1. Turn on the external device.

2. Press AUX on the Wave

remote control. Press AUX again to switch

between the AUX 1 and AUX 2 inputs. AUX 1

or AUX 2 appears on the display to confirm your

selection.

3. Adjust the volume using the Wave

remote control.

Note: The Wave

music system remote control cannot

turn a connected AUX device on or off, or change its set-

tings or selections.

Note: Neither AUX 1 or AUX 2 can be selected as an

alarm source.

PERATION

music system

English – 11