Bose AmPlus 50 Руководство монтажника - Страница 16

Просмотреть онлайн или скачать pdf Руководство монтажника для Усилитель Bose AmPlus 50. Bose AmPlus 50 20 страниц. Business music amplifiers

Bose AmPlus 50 Руководство монтажника
All About The AmPlus
Figure 5

AmPlus 50 amplifier controls

Figure 6
Internal remote volume
switch
16
TM
50 Amplifier
AmPlus 50 amplifier controls
INPUTS A
LEVEL
Ch1
Ch1
Ch2
-6
-10
-10
-40 dB
0
-40 dB
+
-
+
-
Inputs – The AmPlus 50 amplifier comes with two balanced inputs. They can be left
and right from a stereo source; two mono sources can also be mixed. Since the
AmPlus 50 amplifier is a single channel amplifier, a stereo source is internally summed
to mono.
Level – Channel 1 level adjust – This potentiometer (pot) controls the signal level of the
Channel 1 input source.
Channel 2 level adjust – This pot controls the signal level of the Channel 2 input
source.
Bass Gain – Use the bass gain pot to increase the output level between 50Hz and
150Hz (affects 50Hz – 150Hz only). This is useful for compensating for poor bass
cabinet loading or high levels of low-frequency ambient noise.
Remote Volume – Connect the remote control unit to the zone 1 (+) pin and the
ground pin.
EQ 1
Power Amplifier Outputs – The 70/100V output is active when the amplifier Mode
Switch is in the 70/100V position. The 4 output is active when the amplifier Mode
Switch is in the 4 position.
Internal High Pass Switch – When this switch is in the "HPF ON" position, frequen-
cies below 150Hz are attenuated at 18dB/OCT. Use this switch for band-limiting high-
frequency speakers in a bi-amplified system.
BASS
REMOTE
GAIN
VOLUME
Ch2
-6
0
OFF +10
High Pass
Filter
C
POWER AMPLIFIER
MODE
70/100V
4-16
+
- +
-
70/100V
4-16