Bose PowerMatch PM8500N Руководство пользователя - Страница 5

Просмотреть онлайн или скачать pdf Руководство пользователя для Усилитель Bose PowerMatch PM8500N. Bose PowerMatch PM8500N 44 страницы. Configurable professional power amplifier

Bose PowerMatch PM8500N Руководство пользователя
pro.bose.com
15. To prevent risk of fire or electric shock, avoid overloading wall outlets, extension cords, or integral convenience receptacles.
16. Do not let objects or liquids enter the product – as they may touch dangerous voltage points or short-out parts that could result in a
fire or electric shock.
17. See product enclosure for safety-related markings.
18. No naked flame sources, such as lighted candles, should be placed on the apparatus.
19. The mains plug is used to disconnect the device and it shall remain readily operable. To completely disconnect the power input, the
mains plug of the apparatus shall be disconnected from the mains.
20. The front-panel LCD screen will illuminate when the product has mains power. If power is applied and the LCD screen is not
illuminated, please send the unit for service.
21. Do not allow the unit to exceed the maximum operating ambient temperature of 40° C. Be aware of conditions in an enclosed rack
that may increase the temperature above room ambient conditions.
Note: The product must be used indoors. it is neither designed nor tested for use outdoors, in recreational vehicles, or on
boats.
This product conforms with all EU Directive requirements as applicable by law. The complete Declaration of Conformity can
be found at www.Bose.com/static/compliance.
This Product meets the immunity requirements for the e2 class eN55103-2 directive.
Initial turn on inrush current: 14.8 Amps (230V / 50 Hz)
Inrush current after 5 seconds AC mains interruption: 15.4 Amps (230V / 50 Hz)
information About Products That generate electrical Noise (FCC Compliance Notice for U.s.)
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the interference at one's own
expense.
This product complies with the Canadian iCes-003 Class A specifications.
English
safety information
important
Installation and Safety Guidelines Page 5