Bose Lifestyle 35 Series II Руководство по установке - Страница 22

System Installation

Figure 18

Using the AdaptiQ calibra-

tion headset

Using the ADAPTiQ

audio calibration system

1. Use the TV remote to turn on your television.

2. Select the video input connected to the LIFESTYLE

3. Lift up the media center front cover and press the Open/Close button.

4. Insert Setup Disc 1 into the tray (label side up) and press the Open/Close button again.

5. On the remote control, press the CD/DVD button.

6. As the disc begins to play, listen carefully and follow the instructions. You will be

instructed when to play Disc 2.

7. When Disc 2 indicates, connect the ADAPTiQ calibration headset to the AUX jacks on the

connection panel of the media center as shown below.

8. Put on the headset so it rests above your ears for the greatest comfort during the

ADAPTiQ audio calibration process.

9. Disc 2 will explain the procedure you are to follow.

Save the headset for possible future use

When you have played both discs and followed their instructions, the installation of your

LIFESTYLE

DVD system is complete and its performance is tailored to the placement of your

system and your listening area.

You may want to customize your system again if you move it to another room or significantly

change the arrangement of the room by relocating furniture, the speakers, or the

Acoustimass

module. You can repeat the steps in "Finishing the basic installation" on

page 21 at any time.

Keep the headset and discs together in their original carton and store them in a safe location.

system media center.

AUX