Drone Sky Hook ARROW DSH-DRD2-P4-3 Руководство по быстрой установке - Страница 2

Просмотреть онлайн или скачать pdf Руководство по быстрой установке для Аксессуары для дронов и квадрокоптеров Drone Sky Hook ARROW DSH-DRD2-P4-3. Drone Sky Hook ARROW DSH-DRD2-P4-3 2 страницы. Professional release & drop device for dji phantom 4 / phantom 3

Печатать страницу
Model numbers: DSH-SRD2-P4-3; DSH-DRD2-P4-3; DSH-SRDP2-P4-3; DSH-DRDP2-P4-3
Quick Installation Guide - DJI Phantom 3 (all models)
1
Slide the alignment pin bracket
from the drone's inner side on
both rear landing gear
4
Align the Drone Sky Hook Arrow's
hole with the alignment pin and
press down on the Arrow until it
locks to the landing gear
7
The LED Sensors is installed under
the front right electric motor
10
Fully insert the plug of the LED
Sensor cable into the 'SENS' port
on the Drone Sky Hook Arrow
DRONE SKY HOOK Ltd.
For Installation and Operation videos visit
Drone-Sky-Hook - ARROW
Professional Release & Drop device for DJI Phantom 4 / Phantom 3
2
Turn the alignment pin bracket
towards the bottom side of the
landing gear until it locks
5
Press down the other side of the
Drone Sky Hook until it locks to the
landing gear
8
Slide the rubber band over the
motor and insert the pin to the
hole in the drone's arm
11
3
Verify that the alignment pin
bracket is in-line with the bottom
side of the landing gear
6
The locking pins should be fully
inserted
9
The LED Sensor should fully cover
the drone's lens
ALL SET !
www.droneskyhook.com/product-support
v1.2
www.droneskyhook.com