Drone Sky Hook DSH-DRD2-P4 Краткое руководство по эксплуатации

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Аксессуары для дронов и квадрокоптеров Drone Sky Hook DSH-DRD2-P4. Drone Sky Hook DSH-DRD2-P4 3 страницы. Arrow single/dual release & drop for phantom 4 / phantom 3 series drones, arrow single/dual release & drop plus for phantom 4 / phantom 3 series drones

Печатать страницу

Drone-Sky-Hook ARROW Single/Dual Release & Drop for Phantom 4 / Phantom 3 series drones

Model numbers: DSH-SRD2-P4/3, DSH-DRD2-P4/3

Drone-Sky-Hook ARROW Single/Dual Release & Drop PLUS for Phantom 4 / Phantom 3 series drones

Model numbers: DSH-SRDP2-P4/3, DSH-DRDP2-P4/3

Quick Operation Guide

Controlling the Single Drop Wheel

DSH Models: Single Release & Drop / Single Release & Drop PLUS

Operation Mode 1 – Drone Rotation

Remote Controller (Mode 2)

LEFT STICK

Operation Mode 2 – Drone Remote Controller C1/C2 Button and/or DJI App

Remote Controller

C1 / C2 Button

DJI App

Settings – Main Controller Settings – Advanced Settings

Operation Mode 3 – Manual – FUNC button on DSH unit

DSH Release & Drop unit

IMPORTANT NOTE: At the end of each operation wait 3 seconds for the execution your command and before the initiation of

the next command (False Command Avoidance Algorithm (FCAA)).

DRONE SKY HOOK Ltd

For Installation and Operation videos visit

v1.1

Quickly Rotate (YAW) the drone two full turns counter clockwise to drop the payload.

To set the drop wheel back to its previous position, Quickly Rotate (YAW) the drone again two full turns counter clockwise.

Note: Use the DJI App to assign C1 or C2 button to Turn On/Off front LEDs

Press C1 or C2 twice in quick succession (while maintaining about 0.5-1 second between each press) to drop the

payload.

To set the drop wheel back to its previous position, again press C1 or C2 twice in quick succession (while maintaining

about 0.5-1 second between each press).

In the App menu switch the drone's front LEDs ON and then OFF or OFF and then ON.

(Total of one ON-OFF or OFF-ON cycle) to simulate the operation of the C1 or C2 buttons on the drone's remote

controller (see above).

Maintain about 0.5-1 second idle duration between each switch operation.

Press twice the device's FUNC button to simulate the operation of the C1 or C2 buttons on the drone's remote

controller (see above).

Maintain about 0.5-1 second idle duration between each operation of the FUNC button.

www.droneskyhook.com/product-support

Operation