Elegant Union Group G-600 Руководство пользователя - Страница 9

Просмотреть онлайн или скачать pdf Руководство пользователя для гриль Elegant Union Group G-600. Elegant Union Group G-600 13 страниц. Portable

Before connection, be sure that there is no debris caught in the head of the gas cylinder, head of the regulator valve, or

in the head of the burner and burner ports. Connect regulator valve and hand-tighten firmly. Disconnect the propane

cylinder from the regulator valve when the grill is not in use. DO NOT obstruct the flow of combustion air and ventilation

air to the grill.

CONNECTING THE GAS CYLINDER TO THE APPLIANCE

This appliance is suitable for use with propane gas , fitted with the appropriate low-pressure regulator via a

flexible hose. The hose should be secured to the regulator and the appliance with hose clips. This barbecue is set

to operate at 37 mbar for propane gas cylinder. Use a suitable regulator certified to EN16129:2013 . Please

consult your LPG dealer for information regarding a suitable regulator for the gas cylinder.

REGULATOR AND HOSE

Use only regulators and hose approved for LP Gas at the above pressures. The life expectancy of the

regulator is estimated as 2 years. It is recommended that the regulator is changed within 2 years from the date of

manufacture.

The use of the wrong regulator or hose is dangerous, always check that you have the correct item before operating

the barbecue.

The hose used must conform to the relevant standards for the country of use. The length of the hose must be 1.5

metres (maximum). Worn or damaged hose must be replaced. Ensure that the hose is not obstructed, kinked or in

contact with any part of the barbecue other than at its connection.

STORAGE OF APPLIANCE

Storage of an appliance indoors is only permissible if the cylinder is disconnected and removed from the appliance.

When the appliance is not in use for a period of time it should be stored in its original packaging and stored in a dry,

dust free environment.

GAS CYLINDER

The gas cylinder should not be dropped or handled roughly. If the appliance is not in use, the cylinder must be

disconnected. Replace the protective cap on the cylinder after disconnecting the cylinder from the appliance.

Cylinders must be stored outdoors in an upright position and out of the reach of children. The cylinder must never

be stored where temperatures can reach over 50

cooled with a Cold Wet Fire Blanket.

Do not store the cylinder near flames, pilot lights or other sources of inflammation. DO NOT SMOKE.

Should you need to change the Gas Cylinder, ensure that the barbecue is switched off, and there are no sources of

ignition (cigarettes, open flame, spark..etc.) near before proceeding. Inspect the gas hose to ensure it is free of any

twisting or tension.

Before connection, ensure that there is no debris caught in the head of the gas cylinder, regulator, burner and

burner parts. Spiders and insects can nest within and clog the burner/venturi tube at the orifice. A clogged burner

can lead to a fire beneath the appliance.

Fit the hose to the appliance using a spanner to tighten it onto the connection thread. If the hose is replaced it must

be secured to the appliance and regulator connections with hose clips. Disconnect the regulator from the cylinder

(according to the directions supplied with the regulator) when the barbecue is not in use.

The barbecue must be used in a well ventilated area. Do not obstruct the flow of combustion air to the burner when

the barbecue is in use. ONLY USE THIS BARBECUE OUTDOORS.

OPERATING YOUR GRILL

C. Should the Temperature exceed 50

C then it should be