Elegoo MARS 4 Series Руководство пользователя - Страница 14
Просмотреть онлайн или скачать pdf Руководство пользователя для 3D-принтеры Elegoo MARS 4 Series. Elegoo MARS 4 Series 20 страниц.
Также для Elegoo MARS 4 Series: Руководство пользователя (20 страниц)
Печатать страницу
3.3 Resin Parameter
(See Picture 15)
Resin Density:
1.1g/ml
Resin Cost:
You can input the cost of the resin, and after slicing you will see how much
it costs for your model.
3.4 Parameters
(See Picture 15)
Layer Height:
The thickness of each printed layer, the recommended height
is 0.05mm, but you can set it from 0.01-0.2mm. The higher thickness you set, the
longer time it will take for exposure of each layer.
Bottom Layer
Count:The setting number of initial printing layers. If the number of
bottom layers is n, the exposure time of the first n layers is the exposure time of the
bottom layer, the default setting is 5.
Exposure Time:
The exposure time for normal printing layers. The default exposure
time is 2.3 seconds, and the thicker the printing layer setting is, the longer time it
will take.
Transition Layers:
The number of transition layers after the bottom layer to make it
stickier between layers. Except for the exposure time, other parameters of the
transition layer are the same as the normal layer, the default setting is 5.
Bottom Exposure Time:
The setting of bottom layer exposure time. Properly increasing
the bottom layer exposure time can help to increase the stickiness between the
printing model and the build platform; the default setting is 35 seconds.
The longer the setting time, the stickier the bottom layer will be on the build platform.
Wait After Lift:
When the printing platform is stationary, the time difference between
the build platform starts to return to the printing surface after lifting, the default
setting is 0 seconds.
Wait Before Cure:
After the build platform moves to the printing surface, the time
difference between the build platform starting to stationary and starting to exposure,
the default setting is 1 seconds.
Wait After Cure:
The time difference between the end of the exposure and the start of
the build platform to leave the printing surface, the default setting is 0 seconds.