anko TA5011C-SA Руководство пользователя - Страница 5

Просмотреть онлайн или скачать pdf Руководство пользователя для Тостер anko TA5011C-SA. anko TA5011C-SA 7 страниц.

4. Lower carriage handle down vertically until it is latched in place. The indicator on the

Cancel button will be illuminated, and the appliance will begin toasting.

NOTE: The carriage handle can only be latched when the appliance is connected to mains

power.

5. Once the bread has been toasted to the preset colour, the carriage handle will

automatically pop up.

NOTE: During toasting, you may also observe the toasting colour. If it is satisfactory,

you can press the Cancel button to cancel the operation at any time, but never lift

carriage handle to cancel toasting.

6. If you want to toast frozen bread, set colour control knob to your desired colour, and

then lower carriage handle down vertically until it is latched in place. Then press the

Defrost button and the indicator of Defrost button will be illuminated. In this mode,

bread will be toasted to your desired colour.

7. If you want to warm cold toasted bread, lower the carriage handle vertically until it is

latched in place. Then press the Reheat button and the indicator of Reheat button will be

illuminated. In this mode, toasting time is fixed. The carriage handle will automatically

spring up when the reheating process is completed.

CAUTION

1. Remove all protective wrappings prior to toasting.

2. If toaster starts to smoke, Press Cancel to stop toasting immediately.

3. Avoid toasting the food with extremely runny ingredients such as butter.

4. Never attempt to remove bread jammed in the slots without unplugging the toaster from

the electrical outlet first. Be sure not to damage the internal mechanism or heating

elements when removing bread.

5. The bread slot is only applicable for toasting regular bread slice.

6. In order to achieve uniform colour, we recommend that you should wait minimum 30s

between each toasting so that colour control can reset automatically.