Beckmann+Egle MD3060 Руководство по эксплуатации - Страница 16
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Термометр Beckmann+Egle MD3060. Beckmann+Egle MD3060 16 страниц.
Печатать страницуMD3150/3060
Technical data
General
Interface:
Memory capacity:
Power supply:
Power save mode:
Operating temperature:
Dimensions:
Weight:
LC display size:
Time trigger:
Display:
MD3150
Measuring range:
Accuracy
Sensor:
Power consumption :
Battery life:
MD3060
Measuring range:
Accuracy :
Sensor:
Power consumption :
Battery life:
Copyright BECKMANN+EGLE GmbH, All rights reserved.
Serial interface (RS232)
8-pin MINI-DIN
-to output measured value in memory or on-line output of each value
directly after measurement
-values are output in uncoded form (ASCII) via interface
800 measured values (permanent)
minimum, maximum and average temperature values
9V block battery type 6F22 or
9V mains adapter with MINI-DIN plug
Device switches off automatically after 4 minutes inactivity
0°C to 50°C. (ambient)
approx. 78 x 170 x 25 mm ( W x H x D )
approx. 260g including battery
46 x 25 mm
Interval 1 to 9999 seconds
Power save mode for long-time measurement (t > 64 s)
Manual trigger:
One value measured at any time interval
Automatic threshold trigger:
T
> trigger temperature or
ist
T
< trigger temperature
ist
Temperature:
4 digits
(either °C or °F)
Function:
3-digit
Mode:
1-digit
-20.0 to 120.0°C, at 0.1°C resolution
Maximum deviation 0.1°C, deviation is max. 0.2°C at 90°C and more
NTC sensor, 5kOhm@25°C
5,5 mA
approx. 65 operating hours
-65.0 to 199.0 °C (resolution: 0.1°C)
-200.0 to 1150 °C (resolution: 1.0°C)
(automatic range swap)
-200 ...-65°C, +200°C...+560°C :
+200 ... 560°C:
From 560°C:
NiCr-Ni type K in acc. with IEC 584-2
cold spot comp. by NTC measurement
6 mA
approx. 60 operating hours
Page 16
± 1°C ± 0.5% of measured value
± 1.5°C ± 0.5% of measured value
± 2°C ± 1% of measured value
Internet: www.bue.de