Ankom Daisy II D200 Процедура обслуживания

Просмотреть онлайн или скачать pdf Процедура обслуживания для Аксессуары Ankom Daisy II D200. Ankom Daisy II D200 2 страницы. Controller installation

4. Remove the controller from the plate by

spreading the retaining clips apart (spread

the clips on both sides) and pulling the

controller out of the front of the plate.

ANKOM Technology 2052 O'Neil Rd. Macedon , NY 14502 PH: (315) 986-8090 FAX: (315) 986-8091

Controller Installation

D200/D200I

5. Slide the new controller through the

6. Follow the wiring diagram and wire the

Service Procedure

1. Unplug the power cord from the

machine.

2. Use a Phillips head screwdriver to

remove the four screws that secure the

controller and switch plate to the front

of the Daisy.

3. Pull the panel away from the cabinet and

unplug the grey terminal block from the

controller back.

faceplate. Snap the two retaining clips

around the controller body to secure it in

place. Attach the controller plug to the

controller.

plug as shown. Re-install the faceplate.

The Daisy is ready for use.

002

(Page 1 of 2) 08/06/2014