Ankway ASC001 Руководство пользователя - Страница 8

Просмотреть онлайн или скачать pdf Руководство пользователя для Камера безопасности Ankway ASC001. Ankway ASC001 10 страниц. Intelligent solar energy alert ptz camera

Печатать страницу

Stick the position paper on the wall where you want to install the camera. drilling

the 4 holes according to the 4 red dots on the paper and then fix the bracket

using the expansion screws.

Point the antenna upwards, do not point towards the earth. The antenna is not waterproof upside

down.

Separeted installation:

Accessories needed (not standard configuration)

FAQ

Q1: Why does the camera fail to connect to the app via QR code?

1. Make sure your phone is connected to your 2.4G Wi-Fi. And Input the CORRECT WiFi password of

your router, if you input a wrong password,the product will not be able to connect successfully. Click

the eye icon to double confirm the password you entered correct.

2. Let your phone to forget your 5G Wi-Fi connection from your Phone Wi-Fi list to avoid proity pick up.

3. The QR codes on the user manual is for downloading the Ubox app.As soon as you connect the

camera to the solar panel the camera will turn on and ask you to hold your phone about four inches

away from the camera lens while you phone is scanning. You had to keep moving it back and forth

until got the connection.

4. Try to avoid your phone screen too light or too dark so that camera can read the QR code clearly on

the phone without reflecting light.

5. Enable your router DHCP option and set your router to dynamic IP addressing to avoid conflict with

your other wireless devices for one static IP address.

6. Reboot your router to reallocate your IP address and refresh your network.

7.Reset and reconnect.Hold on the reset button for 4-5 seconds and then release it when you hear

"system reset " to reset your camera to default.

Q2: Why do I fail to connect the camera to the App by sound wave?

1.Please make sure the camera is powered on and there will be voice prompts that indicates it.

2.Make sure the distance between your mobile phone and the device is no more than 30cm. And your

mobile, camera and router are in the same room.

3.Make sure your phone volume is turned up and your router ID + password no more than 32 digits.

Page 07

1× Bracket

1× Extra power cable 2M