ANLIDAR MYTORQ MYP40-1500 Руководство по эксплуатации и техническому обслуживанию - Страница 5
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Контроллер ANLIDAR MYTORQ MYP40-1500. ANLIDAR MYTORQ MYP40-1500 8 страниц.
Печатать страницу
1. Please read the operating manual thoroughly and comply with safety regulation to operate this Multi-Function
Controller.
2. Please grasp the plug of power cord while plugging in or out the plugs of connecting cord of Electric
Screwdriver and power cord.
3. Please fix the power controller to avoid any danger of pulling and dragging the power cord.
4. Do not near oil, chemical materials or heated objects, also please be alert not to scratch the power cord by
sharp object.
5. This type of Controller can only be applied to Anlidar Electric Screwdriver with Counter. Do not use Electric
Screwdriver Controller on other types of machinery.
6. In case of the Controller is overheated or overloaded with maximum current rating of fuse, the high-speed fuse
will be melted down and cut off the power. If the Controller continues to jump off or has an abnormal switching
reaction, please stop the operation immediately and send back the Controller for repair.
7. When Electric Screwdriver is running, if slides Forward/Reverse Switch instantly, device will generate the
protection program to force Electric Screwdriver stop.
8. Please do not disassemble Electric Screwdriver casually and try to repair it by self.
9. When Controller is not in use, please turn the main power switch OFF and unplug the power.
10. The electric frequency will be lower when the voltage is adjusted as Lo or below 32V,so the torque of the
electric screwdrivers can't be worked out except below scale of 4.
Operations Cautions
WARNING！
DO NOT OPERATE THIS TOOL WITHOUT
PROTECTIVE EARTH CONNECTED
4