Drucker 614B Руководство по эксплуатации - Страница 2
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Лабораторное оборудование Drucker 614B. Drucker 614B 6 страниц. Laboratory centrifuge
Печатать страницуTable of Contents
Setup Location and Procedure
Operation
Rotor Removal and Installation
Tube Holder Configurations
Care and Preventative Maintenance
Calibration and Ground Testing
Troubleshooting
Model Description:
The Model 614B is a continuous duty centrifuge designed for the small lab or
doctor's office for the purposes of separating laboratory fluids. The unit is controlled
by a mechanical timer settable from 1 to 30 minutes. Samples can be safely viewed
through the transparent lid. In the event that the lid is opened during a run, the
power to the motor is disconnected.
For warranty information, turn to page 10.
Supplied Equipment*:
The following items come standard with each Model 614B centrifuge:
1.
One (1) six-place fixed-angle rotor
2.
Operator's manual
3.
Six (6) 125mm tube holders
4.
Six (6) 100mm tube holders
5.
Six (6) 75mm tube holders
*
The rotor and rotor accessories are rated for a rotation frequency of 3,500 RPM.
WARNING:
For the safety of both the
operator and service personnel, care should
be taken when using this centrifuge if
pg. 2
handling substances that are known to be
pg. 2
toxic, radioactive or contaminated with
pg. 3
pathogenic microorganisms. When Risk
pg. 3
Group II materials are used, (as identified in
pg. 4
the World Health Organization "Laboratory
pg. 5
Bio-Safety Manual"), a Bio-Seal should be
pg. 5
employed. The Bio-Seal accessory for the
pg. 6
model 614 tube holders is the non-aerosol
pg. 7,8
shield cap, p/n 7713011. In the event that
pg. 8
materials of a higher risk group are being
pg. 8
used, more than one level of protection must
pg. 8
be provided. The use of flammable or ex-
plosive materials as well as those materials
pg. 9
which have a vigorous chemical reaction is
pg. 9
prohibited. For your safety and the durability
pg. 10
of your machine, never transport or store
centrifuge with tube holders inside machine.
p/n
7786047
p/n
7713032
p/n
7713031
p/n
7713033
Operator's
1.
Manual
2.
3.
4.
x 6
x 6
Page 2
5.
x 6
NOTES:
Page 11